Firetracker Panasonic Remote Display Unit Interface Board

1587

Call 02 9150 7744 For the BEST DEAL

In each control unit there can be, in total, up to six expansion boards of all types mounted.

Up to TWO 1587 boards can be used.

Because of high components on the board, a 1587 board always has to be mounted "on top".

Each board has to be programmed (Win512) regarding:
- Address (= set with jumpers on the board, i.e. 0 or 1)
- Name (Default is DU 1587, which is normally not changed)

This board is an interface only for Presentation unit 1728 and Alert annunciation Units 1736 running in S/W mode 2.3.2 or greater

The data rate in this mode is 9600 baud.

The theoretical number of units that can be connected to the board is sixteen but it is depending on the type and the number of the units respectively, the cable type and length, etc.

Description

In each control unit there can be, in total, up to six expansion boards of all types mounted.

Up to TWO 1587 boards can be used.

Because of high components on the board, a 1587 board always has to be mounted "on top".

Each board has to be programmed (Win512) regarding:
- Address (= set with jumpers on the board, i.e. 0 or 1)
- Name (Default is DU 1587, which is normally not changed)

This board is an interface only for Presentation unit 1728 and Alert annunciation Units 1736 running in S/W mode 2.3.2 or greater

The data rate in this mode is 9600 baud.

The theoretical number of units that can be connected to the board is sixteen but it is depending on the type and the number of the units respectively, the cable type and length, etc.

Good to know