Electricians Call (02) 9150 7744 for Trade Pricing

Browse by category

Clipsal Cable Management
Clipsal Datacomms
Clipsal Electrical Accessories
Clipsal Industrial
Clipsal Integrated Systems
Clipsal Lighting
Industrial Switchgear
Switchboards
Circuit Protection
Switches, Power Points, Junction Boxes, Mounting Blocks
Weatherproof Switches, Power Points & Isolators
Switchboard Active Neutral Links
Smoke Alarms
Brooks Australia
Solar Products
Contactors, Thermal Overloads, Auxiliary Contacts
Wiring Accessories
Wall Brackets
Conduit & Fittings
Cable Duct
Tools & Testing Equipment
Heating and Cooling
Electrical Hardware & Safety Products
Sunny Lighting
Lighting
LED Lighting
Cables
Data Products
Data Supplies
Electric Kilowatt Hour Meter Kwh
Timers, Time Delay Switches
Domestic Television Products
Commercial Television Products
Doorchime & Bell
Security Cameras & DVR Systems
Pump and Motor Control
Unistrut Electrical and Mechanical Support Systems
Security and Building Automation
NHP Electrical Engineering Products
Repelec
Healthcare
Smart Electrical Accessories
EV Charging Stations

RCD/ MCB SALE

140 Series Mains Powered Replaceable Battery Back Up

Sort by Position: Low to High
64 Per Page
-38%
Photoelectric Smoke Alarm Mains Powered with 9V Replaceable Battery Back-up EIB146RC
Photoelectric Smoke Alarm Mains Powered with 9V Replaceable Battery Back-up
$90.30 $144.50  
In stock

The EIB146RC is an Photoelectric Smoke Alarm with 230V AC mains power supply and replaceable Alkaline battery back-up.

The EIB146RC is supplied with the Easi-fit base to facilitate quick and simple installation, combined with simple smoke alarm head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the smoke alarm head slides on.

The EIB146RC may operate as a standalone Alarm or may be interconnected to other Alarms via a wired or wireless system. For a wireless system each Alarm must be fitted with an EIB168RC RadioLINK base. When interconnected all Alarms in the system will sound if a fire is detected.

The Alarm is fitted with a Test / Silence button to facilitate frequent testing of your Alarm and System. The Silence function allows the Alarm / System to be silenced in the case of a false / nuisance alarm, e.g. cooking fumes.

The EIB146RC is fitted with a mains “power on” green LED indicator and red LED indicator for various conditions.

The memory feature allows an Alarm that has previously activated to be easily identified (the red LED flashes twice every minute for 24 hours).

− +
-37%
Surface Mount Base for 140 Series use with Conduit or Bulky Wiring EIB127
Surface Mount Base for 140 Series use with Conduit or Bulky Wiring
$25.40 $40.60  
In stock

The EIB127 Surface Mount Relay Base is designed to facilitate installation of bulky wiring and conduits.

The Relay Base is designed to be used in conjunction with EIB141/EIB144/EIB146 Smoke and Heat Alarms.

The unit has been designed so that any of the alarms listed above will fit on top of the EIB127 (the EIB127 is specifically designed so that such alarms fitted with the Easi-Fit base will screw directly to the EIB127).

The EIB127 must only be used with one of the Smoke/Heat Alarms listed above – otherwise the unit will not comply with the mandatory safety regulations.

− +
-38%
Surface Mount Relay base Mains Powered with Battery Backup for 140 series EIB128RBU
Surface Mount Relay base Mains Powered with Battery Backup for 140 Series
$197.50 $316.00  
In stock
Description

The EIB128RBU Base has an integral relay that is activated when the Smoke/Heat Alarm connected to the EIB128RBU enters alarm mode. The relay contacts are isolated and are rated at 250VAC, 5A resistive, and can be used for signaling, turning on lights and sirens or activating door release devices etc.

The EIB128RBU Base is designed to be used with mains powered easi-fit Smoke and Heat Alarms.

In addition, the EIB128COV is a plastic lid for the EIB128RBU that allows the unit to be sited remotely to the Smoke or Heat Alarm, and will also allow non Easi-Fit Alarms to be connected to the EIB128RBU The EIB128RBU Base is designed so that any of the alarms listed above will fit on top of the EIB128RBU.

The EIB128RBU Base must only be used with one of the Smoke/Heat Alarms listed above – otherwise the unit will not comply with the mandatory safety regulations.

− +