101-096 SCP-2 INTELLIGENT 2 DOOR MAIN ACCESS CONTROLLER

101-096 SCP-2 INTELLIGENT 2 DOOR MAIN ACCESS CONTROLLER

"Intelligent Controller"

 DESCRIPTION

The SCP-2 is the next generation High Security intelligent controller. With a proven track record of reliability, versatility and performance, the SCP-2 can be configured in different ways to satisfy the requirements of any system. Controlling from 2 Doors expandable using single or 2 door sub controllers, 250,000 cards and intelligent lift control the SCP-2 feature set offers new connection options and support for new standards, the SCP-2 is the controller of choice.

With a high level interface to the Ness IS2000 Security Management System the SPC-2 controller is an integral part of the professional Security & Access Control solution. SCP-2 provides central control for up to 32 sub-controllers. The SCP-2 contains 16MB of memory enabling up to 250,000 cardholders and a 50,000 transaction buffer. The SCP-2 is a single board solution for two-door control. Each reader port can accommodate a readhead that utilizes wiegand, magnetic stripe, or 2-wire RS-485 electrical signaling standards, one or two wire LED controls, and buzzer control (one wire LED mode only).

Comes complete with encrypted Ethernet Port making it LAN ready.

 BENEFITS

 · The SCP-2 provides central control for up to 32 sub-controllers.

· The SCP-2 contains 16MB of memory enabling up to 250,000 cardholders and a 50,000 transaction buffer.

· The SCP-2 is a single board solution for two-door control. Each reader port can accommodate a readhead that utilizes wiegand, magnetic stripe, or 2-wire RS-485 electrical signaling standards, one or two wire LED controls, and buzzer control (one wire LED mode only).

· The event log buffer is stored in battery backed memory.

· Four form-C relay outputs may be used for strike control or alarm signaling.

· Eight inputs may be used for monitoring door contacts, exit push buttons and alarm contacts.

· Additional I/O devices can communicate via the Sub-Controller communication port, 2-wire RS-485.

· Configuration data and event/status reports are exchanged with the host via port 0, 10-BaseT/100Base-TX Ethernet interface or port 1, RS-232 interface.

CONNECTION

Primary Port: 10/100 Ethernet IP Server

IP Client, DHCP Client

HTTP, TLS, X.509, SNMP

RS-232, Dial-up

DOOR CONTROL

Two reader ports: Mag, Wiegand, or RS-485 Eight supervised inputs, four relays Diagnostic LEDs