POWER HiTESTER 3193-10

3193-10

Call 02 9150 7744 For the BEST DEAL

POWER HiTESTER 3193-10

DC, or 0.5 Hz to 1 MHz wide band width
Wide spectrum power meter for comprehensive device assessment
  • A rich assortment of measurement functions including voltage, current, power, waveform peak value and efficiency
  • High-precision with basic accuracy of ±0.2 %, High-speed response of 0.1 s
  • Measure up to six circuits simultaneously
  • Select from 3 types of input units
Note: Main unit 3193-10 cannot operate alone - please purchase an input unit Model 9600 to 9605 for factory installation prior to shipment. All subsequent input unit replacements or expansions must be conducted at HIOKI for an additional service charge.
Basic specifications (Accuracy guaranteed for 6 months)
Measurement line type Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems
Measurement items [Using the optional 9600, 9601, 9602]
Voltage, current, voltage/current peak, active power, reactive power, apparent power, power factor, phase angle, frequency, current integration, power integration, load rate, efficiency
[Using the optional 9603, added function]
Voltage, torque, rotation, frequency, motor output
[Using the optional 9605, added function]
Harmonic measurement, waveform, voltage fluctuation / flicker measurement function
Measurement range using
AC/DC DIRECT INPUT UNIT 9600
Voltage range: 6/15/30/60/150/300/600/1000 V
Current range: 200/500 mA, 1/2/5/10/20/50 A
Power range: 1.2 W to 150 kW, Depends on measurement mode and combination of voltage and current range
Frequency range: 50/500/5k/50k/2M Hz
Basic accuracy Active power: ±0.1 % rdg. ±0.1 % f.s. (45 to 66 Hz, at use with the 9600)
Display refresh rate 8 times /sec
Frequency characteristics [Using the 9600] DC, 0.5 Hz to 1 MHz
[Using the 9601] 5 Hz to 100 kHz
[Using the 9602] DC, 0.5 Hz to 200 kHz
Other functions Waveform peak measurement, efficiency measurement, D/A output, external control, scaling, averaging, back up function, motor output PM measurement (use with the 9603), etc.
Interfaces RS-232C, GP-IB
Power requirements 100/120/200/230 V AC, switched automatically , 50/60 Hz, 150 VA max.
Dimensions, mass 430 mm (16.93 in) W × 150 mm (5.91 in) H × 370 mm (14.57 in) D, 15 kg (529.1 oz) (with options)
Supplied accessories Instruction Manual × 1, Power cord × 1, Connector × 1

 

POWER HiTESTER 3193-10 (319310E1-28B.pdf, 1,494 Kb) [Download]

Good to know