Electricians Call (02) 9150 7744 for Trade Pricing

Browse by category

Clipsal Cable Management
Clipsal Datacomms
Clipsal Electrical Accessories
Clipsal Industrial
Clipsal Integrated Systems
Clipsal Lighting
Industrial Switchgear
Switchboards
Circuit Protection
Switches, Power Points, Junction Boxes, Mounting Blocks
Weatherproof Switches, Power Points & Isolators
Switchboard Active Neutral Links
Smoke Alarms
Brooks Australia
Solar Products
Contactors, Thermal Overloads, Auxiliary Contacts
Wiring Accessories
Wall Brackets
Conduit & Fittings
Cable Duct
Tools & Testing Equipment
Heating and Cooling
Electrical Hardware & Safety Products
Sunny Lighting
Lighting
LED Lighting
Cables
Data Products
Data Supplies
Electric Kilowatt Hour Meter Kwh
Timers, Time Delay Switches
Domestic Television Products
Commercial Television Products
Doorchime & Bell
Security Cameras & DVR Systems
Pump and Motor Control
Unistrut Electrical and Mechanical Support Systems
Security and Building Automation
NHP Electrical Engineering Products
Repelec
Healthcare
Smart Electrical Accessories
EV Charging Stations

RCD/ MCB SALE

Addressable Analogue Detectors and Devices

Sort by Position: Low to High
64 Per Page
-33%
Panasonic Addressable Analogue Detectors - Enclosed Analogue Heat Detector (Incl. Connection Box, 3 Compression Glands and Gasket)
$171.60 $258.00  
In stock
Panasonic Addressable Analogue Detectors - Enclosed Analogue Heat Detector (Incl. Connection Box, 3 Compression Glands and Gasket)
− +
-33%
Panasonic Addressable Analogue Detectors - Analogue Heat Detector Algorithms for Class A1, A2 S or B S
$126.80 $189.60  
In stock
Panasonic Addressable Analogue Detectors - Analogue Heat Detector Algorithms for Class A1, A2 S or B S
− +
-34%
Panasonic Addressable Analogue Detectors - Analogue Photoelectric Smoke Detector
$135.40 $205.50  
In stock

Panasonic Addressable Analogue Detectors - Analogue Photoelectric Smoke Detector

− +
-33%
Panasonic Addressable Analogue Detectors - Analogue Base
$18.20 $27.30  
In stock
Panasonic Addressable Analogue Detectors - Analogue Base
− +
Brooks Panasonic 4A power supply (without batteries)
Call 02 9150 7744 For the BEST DEAL  
In stock

Brooks Panasonic 4A power supply (without batteries)

-33%
Panasonic Addressable Analogue Detectors - Addressable Sounder Base (Sounder & Analogue Base in One Unit)
$115.90 $174.00  
In stock
Panasonic Addressable Analogue Detectors - Addressable Sounder Base (Sounder & Analogue Base in One Unit)
− +
Brooks Panasonic 4 Amp External Power Supply 3366
Brooks Panasonic 4 Amp External Power Supply
Call 02 9150 7744 For the BEST DEAL  
In stock

The External Power Supply 3366 consists of a rectifier (the main power source) and a charger board mounted in a grey metal housing, which also has space for two maintenance-free sealed Lead-Acid backup batteries, rated 12 V, 6.5-7.5 Ah (the second power source). Larger batteries (up to 60 Ah) have to be placed outside the housing. The unit is connected to a COM loop. It is monitored from the c.i.e. and e.g. loss of the main power source (230 V AC) will generate a fault in the c.i.e. There are cable inlets on the top, bottom and back sides of the housing and two compression glands are attached. The 3366 unit is used in the systems firetracker 512 & 128 when an external power supply monitored from the c.i.e. is required.

BROOKS Addressable Manual Call Point with Isolator 4433
BROOKS Addressable Manual Call Point with Isolator
Call 02 9150 7744 For the BEST DEAL  
In stock

• Test key for routine testing without breaking the glass element

• Built-in short-circuit isolator

• Protection against accidental operation

BROOKS Enclosed Addressable Manual Call Point with Isolator 4439
BROOKS Enclosed Addressable Manual Call Point with Isolator
Call 02 9150 7744 For the BEST DEAL  
In stock

• Attractive design & Built-in short-circuit isolator. IP rating IP56

• Test key for routine testing without breaking the glass element

Brooks Multi Sensor Photoelectric (Optical) and Thermal 4400
Brooks Multi Sensor Photoelectric (Optical) and Thermal
Call 02 9150 7744 For the BEST DEAL  
In stock

• The multi detector contains one photo-electric (optical) smoke detector and one heat detector within the low profile housing

• The latest IC technology will secure the highest reliability possible

• It has unleaded soldering

• The smoke detection chamber has a high-efficient optical system with an infrared light LED and a photodiode with two lenses

• Light reflection is used to detect smoke, which enters the detection chamber through an insect filter and an optical labyrinth

• The heat sensing element is a thermistor

• The detector is supplied with two red LEDs that will be blinking when the detector has activated alarm

• It also has a green polling LED. The detector is plugged in an analogue base (3312 / 4313 / 3379)

• The COM loop is connected to the base, which also can have terminals for an external LED, e.g. BARIL

• The detector is intended for indoor use in dry premises and in the systems FT128 / FT512 / FT1020G3

-33%
Address Setting Tool 4414
Address Setting Tool
$455.90 $683.90  
In stock

Used for COM loop address and mode settings

− +
Brooks Panasonic 2 Supervised Voltage Output Module [CLONE]
Call 02 9150 7744 For the BEST DEAL  
In stock

Description

The addressable 2 voltage output unit 3364 (AOU) is intended to be surface mounted. A plastic protection cover (with 10 cable inlets) is supplied. The 3364 can be mounted in a waterproof box (3362). The unit is connected to a COM loop and requires an external 24V DC power supply (3366). The unit has 14 screw terminals for cable connections. The 3364 unit is intended for indoor use and for dry environments (if not the waterproof box is used). It can be DIN rail mounted with help of a DIN rail interface kit 3363.