L5501RBCP 1 Channel Shutter Relay, Without C-Bus Power Supply
C-Bus DIN Rail Mounted Motorised Blind/Curtain/Shutter Relay Unit, DIN Rail mounted, 1 channel C-Bus Relay Unit for the control of motorised blinds, curtains or shutters. Operates 250V AC and 24V AC or 24V DC motors up to 2A, 1 Channel C-Bus Blind/Curtain/Shutter Relay, 2M modules wide, no C-Bus Power Supply.
Key Features
- DIN rail mounted, 2M wide
- AC input impedance 80 kOhm at 1 kHz
- Electrical isolation 3.75 kV RMS from C-Bus to mains
- Maximum units per network 80
- Load current rating 2 A (motor load)
- Load voltage rating 24 V DC, 24 - 240 V AC
- Warm up time 5 s
- Network clock software selectable
- Network burden software selectable
- Class II switch
- 4 kV rated impulse withstand voltage
- 0 - 45 deg C operating temperature
- 10 - 95% RH operating humidity
- Mains terminals Accommodates 2 x 1.5 mmsq or 1 x 2.5 mmsq (2 x 15 AWG or 1 x 13 AWG)
Product Specifications and Characteristics (ETIM Industrial Standard)
These specifications and characteristics outline physical, mechanical, electrical details.
| Type | Value |
|---|---|
| Brand Name | Clipsal |
| Sub Brand | C-Bus |
| Type of electric connection | |
| With detachable clamps | |
| Rated control supply voltage Us at AC 50HZ | V |
| Rated control supply voltage Us at AC 60HZ | VAC |
| Rated control supply voltage Us at DC | 15 - 36 V |
| Voltage type for actuating | |
| Drive, polarization | |
| Drive, switching attitude | |
| Number of contacts as normally closed contact | |
| Number of contacts as normally open contact | |
| Number of contacts as change-over contact | |
| With forced-guided contacts | |
| Type of switch contact | |
| Complete with socket | |
| Degree of protection (IP) | |
| Width | 36 mm |
| Height | 93 mm |
| Depth | 63 mm |
Order this product by phone
We ship Australia wide 
Quality Products
30 days free return