Clipsal L5501RFCP 1 Channel Relay For Sweep Fan Control Without C-bus Power Supply

L5501RFCP 1 Channel Relay, For Sweep Fan Control, Without C-Bus Power Supply

C-Bus DIN Rail Mounted Sweep Fan Control Relay, 1 Channel C-Bus Sweep Fan Control Relay, Capacitor control, 3M modules wide, no C-Bus Power Supply.

Key Features

• C-Bus current requirement 18 mA, powered from C-Bus network, does not provide power for the C-Bus network
• Maximum units per network 100
• Network clock software selectable
• Network burden Software selectable when Unit Address is 001
• AC input impedance 100 kOhm at 1 k Hz
• Warm-up time 10 s
• Electrical isolation 3.75 kV from C-Bus to mains
• Input voltage for fan motor 100 V AC to 240 V AC; input circuit must have a suitable circuit breaker
• Fan load rating 1.5 A
• Switch duty type (S1) Continuous duty. Line and neutral are switched. Fan motor and neutral are switched
• Speed control Capacitive; capacitor block supplied by fan manufacturer for Low and Medium speeds. High speed uses direct on-line (no capacitor in the circuit). Three unique fan speeds Low, Med and Hi and Off
• Connectors C-Bus: 2 x RJ-45
• Capacitor block: 3 x push button for one 1.5 mm