Universal Process Controller PID - UPC612

UPC612

Call 02 9150 7744 For the BEST DEAL

Universal Process Controller PID - UPC612

Universal Process Controller PID - UPC612

The UPC612 is a conventional PID controller designed for stand-alone applications packaged in a IP54 rated wall mounted enclosure, and features:

  • All types of common process signals as well as a wide range of sensors can be directly connected to the input of the UPC612.
  • The process variable is indicated by a 3.5 digit L.C.D. or L.E.D. indicator, which also displays the set point by depressing a push button close to the indicator.
  • Set point selection can be carried out by adjusting a large-knob potentiometer located at the front panel for convenience.
  • Remote set point option can be fitted with the addition of a "Local-Remote" selector switch.
  • Control mode is normally P (PROPORTIONAL), but can be extended to full PID mode. All tuning potentiometers are located in the termination compartment.
  • A green L.E.D. is energised as soon as the process has stabilised to within 5% of the set point.
  • The process variable is normally available as a 0-1mA retransmit output, but can be factory configured for the popular 4-20mA signal format or any other process signal.
  • Control outputs are available as analogue, opto coupler, open collector or as 8A rated contacts, depending on the factory configured type.

Common applications include:

  • Water quality control of public swimming pools, fountains and water features.
  • Motor or pump control.
  • All factory applications suitable for PID control.

Inputs

ac Current

ac Voltage

dc Current/Voltage

pH/REDOX

Resistance

RTD

Speed/Frequency

Temperature

Thermocouple

Function

Controller

Outputs

dc Current/Voltage - Separate Power

Pulse/Frequency

Relay

Good to know