3-Phase Track Initial Feed Black Haneco
Black initial feed for Haneco 240V 3-circuit track, providing the mains power connection at the start of a track run. Plastic body measuring 33mm x 98.5mm x 32mm (H x L x W) and weighing 0.1 kg. Supports separate switching of up to three track circuits, with a black finish to match Haneco black track sections. Mains connection requirements and suitable applications are listed further down the page.
Sign in
Please login to continue to your account.
Alternatively Known As: Haneco 240V Initial Feed, Haneco 3-Circuit Track Live End, Haneco Track Power Feed Connector
- Product Code: SMTCN-BK-INTFEED
- SAP Code: 2000415
- System: 3-circuit track lighting
- Input Voltage: 240V
- Colour: Black
- Body Material: Plastic
- Connection Type: Initial feed/live end
- Compatible System: Haneco 240V 3-circuit track
- Dimensions (H x L x W): 33mm x 98.5mm x 32mm
- Weight: 0.1 kg
- Provides the mains power connection at the start of a track run
- Designed for Haneco 240V 3-circuit track systems
- Black finish to match black track sections and accessories
- Supports separate switching of up to three track circuits
- Compact connector design for clean track installation
- Mains electrical connection must be completed by a licensed electrician in accordance with the manufacturer's instructions and applicable Australian electrical installation requirements, including AS/NZS 3000.
- Connecting mains power to the beginning of Haneco 3-circuit track runs
- Residential track lighting installations
- Retail, hospitality and commercial display lighting
- Gallery, showroom and accent-lighting systems
- AS/NZS 3000:2018 – applicable to the electrical installation and mains connection; this product-specific compliance was not separately stated by the manufacturer.
- AS/NZS 60598.1 – relevant general safety framework for mains-connected lighting equipment and associated track systems; product-specific certification was not separately stated.
- Enables three separately controlled lighting circuits, which can support targeted lighting and reduced energy use compared with operating all fittings together.
- Modular track components can be replaced individually, potentially reducing material waste from replacing an entire track system.
- Plastic body material is lightweight, reducing material and transport requirements compared with heavier metal alternatives.
Haneco provides a direct replacement warranty for its products, with the warranty period typically ranging from 3 to 5 years depending on the product. Product-specific warranty duration should be confirmed with Haneco or the supplying wholesaler. ([haneco.com.au](https://haneco.com.au/support/warranty-information/?utm_source=openai))
Available through Haneco and authorised Australian electrical wholesalers and distributors.
Q: What does the Haneco 3-phase track initial feed do?
A: It provides the mains power connection at the start of a Haneco 3-circuit track run, acting as the initial feed or live end for the system.
Q: Who should install the initial feed?
A: A licensed electrician should complete the mains connection in line with the manufacturer’s instructions and applicable Australian electrical installation requirements, including AS/NZS 3000. The product is also backed by a 30-day return.
Close off the far end of the run with a 3-phase track end cap in black.
A 90 degree track connector in black carries the run around a corner after the feed.
Mount the feed at the start of 3m matt black Haneco track.
Available now from SCHNAP — trusted by Australian electricians and electrical contractors.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
