Trade Discount 25%
4 Door NAC Wiegand Kit Dual Wiegand Interface 12V DC Tecom
Tecom 4 door NAC Wiegand kit features a dual Wiegand interface and 12V DC power. Ideal for access control systems using Wiegand readers.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom 4 Door NAC Wiegand Kit, TS1066-4WG-KIT, 4 Door Wiegand Access Controller Kit, Tecom NAC Dual Wiegand Kit
Technical Specifications
- Kit Contents: 1 x TS1066-4 4-door Network Access Controller and 2 x TS1061 Dual Wiegand Interfaces
- Door Capacity: Up to 4 doors
- Wiegand Interfaces: 4 total via 2 x TS1061 modules
- NAC Inputs: 8 onboard inputs
- NAC Relay Outputs: 4 onboard relay outputs
- Dual Wiegand Interface I/O: 4 inputs and 2 relay outputs per TS1061 module
- Power Supply: 11–14 VDC for TS1061 interfaces; NAC accepts 15–24.5 VAC input
- Current Consumption: 80 mA per TS1061 interface
- Communications: RS-485 system and local buses; Ethernet and USB on the NAC
- Reader Compatibility: Wiegand readers, with Tecom system integration
- Operating Temperature: 0°C to 50°C
- Maximum Cable Distance: Up to 1,500 m from the controller for TS1061 interfaces
- Firmware: Remote flash firmware upgradeable
- Dimensions (H x L x W): 55mm x 254mm x 110mm
- Weight: 0.78 kg
Key Features
- Controls up to four access-controlled doors
- Provides four Wiegand reader interfaces through two TS1061 modules
- Includes additional inputs for door contacts, request-to-exit devices and monitoring functions
- Provides relay outputs for electric locks, door-open-too-long sounders and other controlled devices
- Supports RS-485 connection to Tecom ChallengerPlus and Network Access Controller systems
- Includes tamper monitoring and status LEDs
- Suitable for new Tecom installations or replacement of compatible four-door controllers
- Supports local configuration and remote firmware upgrades
Professional Installation Requirements
- Installation, wiring and commissioning should be performed by a trained access-control technician. Low-voltage power, RS-485 communications, Wiegand reader wiring and electric-lock circuits must be installed in accordance with the manufacturer’s instructions and applicable Australian requirements.
Applications
- Four-door commercial access control systems
- Office, retail, education and industrial building entry control
- Wiegand card, proximity and keypad reader installations
- Tecom ChallengerPlus and Network Access Controller expansions
- Replacement of compatible four-door Tecom access-control hardware
Standards & Compliance
- Applicable electronic access-control system standard: AS/NZS IEC 60839.11.1:2019
- Applicable electronic access-control installation and application guidelines: AS/NZS IEC 60839.11.2:2019
- TS1066 installation documentation references AS/NZS 2201.1:2007, Appendix C, for relevant security-system equipment requirements
Environmental Benefits
- Low-voltage DC operation can support efficient power distribution within access-control systems
- Remote firmware updates can extend service life and reduce premature hardware replacement
- Modular controller and interface design allows individual components to be serviced or replaced rather than discarding the complete system
- Durable commercial access-control hardware can reduce electronic waste over a long installation life
Warranty Information
Tecom Challenger hardware is covered by a 5-year warranty, with replacement subject to testing and verification under the Aritech warranty statement. Warranty terms should be confirmed with the authorised Australian distributor.
Available Now
Available through Tecom/Aritech and authorised Australian security-system distributors; confirm current stock and kit configuration before ordering.
