6MP Bullet Camera 2.8-12mm LiveGuard Hikvision
Hikvision LiveGuard bullet camera features 6MP resolution and a 2.8-12mm lens. Ideal for CCTV and security installs.
Sign in
Please login to continue to your account.
Alternatively Known As: Hikvision 6MP IR Bullet Camera, Hikvision 6MP Outdoor Network Bullet Camera, Hikvision 2665 Bullet Camera
- Image Resolution: 6MP, up to 3072 × 2048 at 20fps
- Image Sensor: 1/2.4-inch progressive scan CMOS
- Lens: 2.8–12mm motorised varifocal lens
- Horizontal Field of View: 114° to 34°
- Minimum Illumination: 0.008 lux at F1.2; 0.011 lux at F1.4
- Infrared Range: Up to 50m
- Wide Dynamic Range: 120dB True WDR
- Video Compression: H.265+, H.265, H.264+ and H.264
- Local Storage: microSD card up to 128GB
- Power: 12V DC or PoE+ IEEE 802.3at
- Maximum Power Consumption: 18W via PoE
- Protection Rating: IP66 and IK10
- Audio and Alarm: Audio input/output and one alarm input/output
- Dimensions (H x L x W): 144mm x 332.7mm x 144mm
- Weight: 1.4 kg
- 6MP imaging for detailed surveillance footage
- Motorised 2.8–12mm varifocal lens for remote zoom and focus adjustment
- Powered by DarkFighter technology for improved low-light performance
- EXIR infrared illumination up to 50m
- 120dB True WDR for scenes with strong backlighting
- H.265+ compression helps reduce bandwidth and storage requirements
- IP66 weather resistance for outdoor installations
- IK10 impact resistance for vandal-prone locations
- Supports PoE+ for combined power and data over one network cable
- Smart detection features including line crossing, intrusion and face detection
- Installation should be performed by a suitably qualified security or network technician. Any mains-powered injector, adaptor or power supply must be installed in accordance with applicable Australian electrical requirements by an appropriately licensed person.
- Outdoor CCTV surveillance
- Commercial and industrial premises
- Retail stores and warehouses
- Building entrances and perimeters
- Car parks, driveways and loading areas
- Residential security installations
- Relevant CCTV system requirements: AS/NZS 62676.1.1:2020
- Relevant CCTV application and installation guidance: AS/NZS 62676.4:2020
- Low-voltage electrical equipment should be assessed against applicable Australian requirements, including AS/NZS 3820 where relevant. The specific camera certification was not verified from the available product documentation. ([hsenode.com](https://www.hsenode.com/NewSamples/AS/125266347/AS-NZS-62676.1.1-2020-1.pdf?utm_source=openai))
- H.265+ compression can reduce network bandwidth and recording-storage demand compared with less efficient codecs
- Durable IP66 and IK10 construction can extend service life and reduce premature replacement waste
- microSD recording support can reduce reliance on additional recording hardware for suitable installations
- PoE connectivity can simplify cabling and reduce the number of separate power connections
Australian warranty terms depend on the supply channel and product series. Australian CCTV distributors commonly state a three-year back-to-base manufacturer warranty for Hikvision IP cameras; Hikvision’s separate five-year programme applies only to listed premium project-oriented series and does not identify this model. Confirm coverage with the authorised Australian distributor at purchase. ([securitywholesalers.com.au](https://www.securitywholesalers.com.au/faqs/warranties-cctv-products/?utm_source=openai))
Available through Hikvision and authorised Australian security-equipment distributors; confirm current stock and regional model availability before ordering.
