Access Control Keypad IP67 Indoor and Outdoor Use Tecom
Tecom access control keypad features an IP67 rating and indoor and outdoor use. Ideal for access control installations.
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom Slimline Arming Station, Tecom 3-LED Keypad, Tecom Challenger Keypad, Tecom Remote Arming Station
- Model: TS1162
- Input Voltage: 10.8–30 V DC
- Maximum Current Consumption: 130 mA
- Communication: Tecom Challenger RS-485 LAN
- Cable: 2 m LiYY cable included
- Operating Temperature: -40°C to +55°C
- Storage Temperature: -40°C to +55°C
- Ingress Protection: IP67
- Housing Material: Moulded plastic
- Status Indication: 3 LEDs
- Output: Open collector, 10 mA maximum
- Input: Request-to-exit control
- Tamper Detection: Optical pry-off tamper
- EMC: C-Tick
- Dimensions (H x L x W): 140mm x 20mm x 40mm
- Weight: 0.15 kg
- IP67-rated construction for dusty or wet environments
- Suitable for indoor or outdoor mounting
- Three LED status indicators
- Request-to-exit input for door egress control
- Open collector output for a door relay or electric strike
- Connects directly to a Tecom Challenger RS-485 LAN
- Communication distance up to 1.5 km from the Challenger panel or Intelligent Access Controller
- Robust moulded plastic housing
- Suitable for installation directly onto a metal surface
- Installation should be performed by a qualified security or electrical installer familiar with Tecom Challenger systems, RS-485 wiring and low-voltage access control equipment. Configure and test the keypad in accordance with the manufacturer's installation requirements and applicable Australian wiring rules.
- Door access control systems
- Tecom Challenger security systems
- Remote arming and disarming stations
- Outdoor gates and entry points
- Commercial buildings and industrial facilities
- High-traffic or exposed access locations
- AS/NZS 60529: IP67 enclosure protection classification; the manufacturer specifies an IP67 rating for the keypad
- Durable IP67 housing is designed for extended service in exposed environments, helping reduce replacement frequency and associated waste
Tecom Challenger hardware is covered by a 5-year warranty under the Carrier Fire & Security Australia warranty policy, subject to the policy terms and conditions.
Available through Tecom, Carrier Fire & Security channels and authorised Australian security distributors.
