SCHNAP Logo

Making Trade Life Easy!
Trade Discount 25%

ATS 3P 125A High Breaking Type A 125A Frame NXZM Chint

BRAND: CABAC
SKU: 297184
$2,798.10 List price: $3,730.80
+ −
30 Days Return Electricians Unlock Trade Access
Chint NXZM 125A 3P ATS features CB class changeover, Type A standard controller, high breaking capacity and 125A frame. Ideal for mains-generator changeover.

Alternatively Known As: CHINT NXZM 125A ATS, 3-pole automatic changeover switch, mains-generator transfer switch, CB-class ATSE

Technical Specifications
  • Product Type: Automatic transfer switching equipment, Class CB
  • Frame Current: 125 A
  • Rated Current: 125 A
  • Number of Poles: 3P
  • High Breaking Capacity: 50 kA rated short-circuit breaking capacity
  • Rated Operational Voltage: 400/415 V AC, 50 Hz
  • Rated Insulation Voltage: 800 V AC
  • Rated Impulse Withstand Voltage: 8 kV
  • Utilisation Category: AC-33B
  • Controller: Type A standard controller
  • Control Supply: 230/240 V AC, 50 Hz
  • Control Voltage Range: 85% to 110% of rated voltage
  • Operating Transfer Time: Approximately 2.8 seconds
  • Mechanical Endurance: 10,000 operations
  • Electrical Endurance: 2,000 operations
  • Installation: Integrated or split controller configuration
  • Operating Environment: -25 °C to +70 °C, subject to derating and installation conditions
  • Dimensions (H x L x W): 300mm x 220mm x 240mm
  • Weight: 8 kg
Key Features
  • Automatic transfer between normal and standby power sources
  • Suitable for mains-generator changeover applications
  • CB-class changeover design using circuit-breaker switching elements
  • 125 A frame and 125 A rated current
  • High 50 kA short-circuit breaking capacity
  • Standard Type A controller with automatic and manual operating modes
  • Mechanical interlocking helps prevent simultaneous connection of both sources
  • Padlockable off position for maintenance isolation
  • Three-pole configuration for three-phase systems
  • Suitable for industrial, commercial and building services installations
Professional Installation Requirements
  • Installation, testing and commissioning must be performed by a licensed electrician or suitably qualified electrical contractor in accordance with AS/NZS 3000, applicable generator installation requirements under AS/NZS 3010, manufacturer instructions and local regulatory requirements. Confirm the required RCM/EESS status before installation in Australia.
Applications
  • Mains-to-generator automatic changeover
  • Standby power systems
  • Commercial and industrial switchboards
  • Building services and essential-load distribution
  • Three-phase emergency power installations
  • Industrial and commercial facilities requiring automatic source transfer
Standards & Compliance
  • Applicable product standard: AS/NZS IEC 60947.6.1:2015 for transfer switching equipment
  • Installation should comply with AS/NZS 3000 Wiring Rules
  • Generator and alternative-supply installations should comply with AS/NZS 3010
  • Exact Australian certification and RCM/EESS registration should be verified for the supplied model
Environmental Benefits
  • Supports continuity of power to essential loads, helping reduce equipment downtime and disruption
  • Robust moulded-case construction and high mechanical endurance can extend service life and reduce replacement waste
  • Copper conductors and metallic components are recyclable at end of service life
  • Automatic transfer operation can support efficient use of standby generation by energising it only when required
Warranty Information

CHINT warranty policy generally covers other low-voltage apparatus for 27 months from the date of manufacture when purchased through authorised sales channels. Contractual terms may vary and Australian consumer guarantees may also apply.

Available Now

Available through authorised CHINT distributors in Australia.

Related Products