Trade Discount 20%
Bulk Solids Level Sensor | Continuous Measurement | W-band Radar Technology | IP67 Rated | by SICK
The Bulk Solids Level Sensor is designed for continuous measurement of bulk solids, utilizing advanced W-band radar technology for accurate readings. With a measuring range of up to 120 m and an IP67 rated enclosure, this sensor is perfect for industrial applications such as storage and processing tanks. Built for reliability and safety, it features a plastic horn antenna and HART communication interface, making it an ideal choice for process control in manufacturing environments.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Medium: Bulk solids
- Measurement type: Continuous
- Probe type: Plastic horn antenna made from PP
- Frequency band: W-band (75 to 85 GHz)
- Measuring range: Up to 120 m, recommended up to 20 m with integrated horn antenna
- Angle of dispersion: 3.5°
- Process pressure: -1 bar to 2 bar (-100 kPa to 200 kPa)
- Process temperature: -40 °C to +80 °C
- Accuracy of sensor element: ≤ 5 mm
- Non-repeatability: ≤ 1 mm
- Digital measurement resolution: < 1 mm
- Analog measurement resolution: 0.3 µA
- Measurement cycle time: Approx. 700 ms
- Step response time: ≤ 3 s
- MTBF: 3.37 million hours
- Communication interface: HART
- Supply voltage: 9 V DC to 30 V DC
- Protection class: I (IEC 61010-1)
- Connection type: M20 x 1.5 / cable gland PA black (5 mm - 9 mm)
- Output signal: 4 mA to 20 mA / HART
- Contamination rating: 4
- Enclosure rating: IP67
- EMC: EN 61326-1
- Start-up current: < 3.6 mA
- Overvoltage category: III (IEC 61010-1)
- Short-circuit protection: Yes
- Isolation: Yes
- Process connection: Mounting clamp, length 170 mm, 316L stainless steel
- Housing material: Aluminum die cast AlSi10Mg, powder-coated
- Sealing material: PP
- Antenna material: PP
- Ambient operating temperature: -40 °C to +80 °C
- Ambient storage temperature: -40 °C to +80 °C
- Dimensions (H x L x W): 170mm x 60mm x 60mm
- Weight: 2.5 kg
Key Features
- Continuous measurement of bulk solids using W-band frequency (75-85 GHz)
- Plastic horn antenna made from polypropylene (PP)
- Measuring range up to 120 m, recommended up to 20 m with integrated horn antenna
- Angle of dispersion 3.5°
- Process pressure range from -1 bar to 2 bar
- Operating temperature range from -40 °C to +80 °C
- Bluetooth magnet pin operation for control
- HART communication interface
- Installed display for easy monitoring
- High accuracy with sensor element accuracy ≤ 5 mm and non-repeatability ≤ 1 mm
- IP67 rated enclosure for protection against dust and water
- Short-circuit protection and isolation for safety
- Mounting clamp process connection with 316L stainless steel
- Housing made of powder-coated aluminum die cast (AlSi10Mg)
Professional Installation Requirements
- Installation should be performed by qualified personnel familiar with industrial sensor setup and electrical safety standards.
Applications
- Bulk solids measurement in industrial processes
- Continuous level measurement in storage and processing tanks
- Process control in manufacturing involving bulk solids
Standards & Compliance
- AS/NZS 4801 – Occupational Health & Safety Management Systems
Environmental Benefits
- RoHS compliant ensuring reduced hazardous substances
- Durable design reduces waste and replacement frequency
- Energy-efficient operation with low power consumption
Warranty Information
Standard manufacturer warranty applies; please refer to SICK's official warranty policy for details.
Available Now
The SICK LBR-XXBXCCMHKKX sensor is available for immediate purchase, ideal for industrial bulk solids measurement and process control applications.
