Contactor CX3 2P 40A 250VAC 24V Coil Front Face Handle Grey Legrand
Legrand Contactor CX3 2P 40A 250VAC 24V Coil Front Face Handle Grey. Ideal for motor control and industrial switching.
Sign in
Please login to continue to your account.
- Utilization category: AC7a or AC1 - 40A / AC7b or AC3 - 22A
- Rated operating voltage: 250V AC
- Rated operating current: 40A
- Rated excitation voltage: 20-26V AC
- Number of normally open contacts: 2
- Number of normally closed contacts: 0
- Max incandescent lamp load: 5000W
- Max fluorescent lamp load: 3100 VA
- Max fluorescent lamp load (Duo circuit): 3400 VA
- Max fluorescent lamp load (parallel compensated): 1400 VA
- Slider for hand switch: Yes
- Width in modular spacings: 2
- Built-in depth: 44 mm
- Degree of protection: IP2X
- Dimensions (H x L x W): 94mm x 44mm x 68mm
- Weight: 0.2 kg
- 2 pole contactor with 2 normally open (NO) contacts
- Rated operating current of 40A at 250V AC
- 24V AC coil voltage
- Front face handle for manual control and testing
- Equipped with label holder for clear circuit identification
- Easy DIN rail mounting with two clamps (top and bottom)
- Permanent ON or OFF without automatic reset
- IP2X degree of protection
- Installation should be performed by a qualified electrician following all relevant electrical installation standards and safety regulations.
- Industrial control panels
- Switchboards and power cabinets
- Control and signalling circuits
- Motor control and automation systems
- Complies with AS/NZS 60950 – Safety of IT and Communication Equipment
- Designed for energy-efficient switching to reduce power loss
- Durable construction reduces waste and replacement frequency
Warranty valid when installed and used according to Legrand guidelines. Unauthorized modifications void warranty.
Legrand Contactor CX³ 2 Pole 40A 250V with front face handle and 24V coil is available for immediate purchase, ideal for industrial and commercial electrical control applications.
