Trade Discount 20%
Copper Compression Sleeve 10mm² Cabac
Cabac 10mm² copper compression sleeve joins conductor ends under crimping. Suited for reliable copper cable joints.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Nominal Conductor Size: 10mm²
- Stranding: 7 strands of 1.35mm diameter
- Inner Diameter: 4.7mm
- Conductive Material: 99.95% pure copper
- Oxygen Content: 30 ppm max
- Tensile Strength: 200 MPa
- Ductility: 40%
- Final Metal State: Fully annealed
- Operating Temperature Range: -55°C to 155°C
- Electroplating Material: 99.9% pure tin
- Electroplating Thickness: 4 microns
- Tooling Compatibility: Interchangeable with Cable Accessories, Utilux, and Burndy tooling
- Dimensions (H x L x W): 4.7mm x 30mm x 10mm
- Weight: 0.1 kg
Key Features
- Made from 99.9%+ IACS high conductivity oxygen-free copper
- Capable of withstanding continuous operating temperature of 155°C
- Crimped with CABAC and MSS Power standard tooling dies
- Electroplated with 99.9% pure tin for corrosion resistance
- Fully annealed for optimal ductility and tensile strength
Professional Installation Requirements
- Should be crimped using standard Australian tooling by a qualified electrician to ensure secure and compliant connections.
Applications
- Electrical power connectivity for cable terminations
- Industrial and commercial electrical installations
- Suitable for use with standard Australian crimping tooling
Standards & Compliance
- Complies with AS/NZS 3000 – Wiring Rules (Electrical Installation)
- Complies with AS4325 Part 1 Australia
Environmental Benefits
- High conductivity reduces energy loss in electrical systems
- Durable materials extend product life and reduce waste
Warranty Information
Warranty against manufacturing defects as per Cabac standard terms.
Available Now
The Cabac CAS10 Copper Sleeve 10mm2 is available now from SCHNAP with a 30-day returns policy, ideal for electrical power connectivity and cable termination applications.
FAQ
Q: What tooling is the Cabac CAS10 compatible with?
A: The CAS10 is compatible with Cable Accessories, Utilux, and Burndy tooling, and is crimped using CABAC and MSS Power standard tooling dies. It should be crimped by a qualified electrician using standard Australian tooling to ensure a secure and compliant connection.
Q: What material and plating does the Cabac CAS10 use?
A: The CAS10 is made from 99.95% pure oxygen-free copper with 99.9% pure tin electroplating at 4 microns thickness. The fully annealed construction gives it a tensile strength of 200 MPa and 40% ductility, suited to demanding industrial and commercial cable termination applications.
For larger conductor terminations in the same installation, a copper sleeve 16mm2 covers the next size up from the 10mm2 in the Cabac range.
Smaller conductor terminations on the same job can be handled by a copper sleeve 6mm2 where the circuit requires a reduced conductor size.
Higher-current terminations on the same switchboard or distribution panel may call for a copper sleeve 25mm2 to match the larger conductor cross-section.
Licensed electricians can unlock trade access pricing — log in or register to get started.
