CP Electronics

SHOP CP ELECTRONICS PRODUCTS BY CATEGORY

Presence & Absence Detectors

Reviewed products cover PIR and microwave detection. GESM combines PIR presence detection with lux sensing and IP54 protection, while MWS6-PRM uses microwave detection with 360-degree horizontal coverage and a stated floor detection diameter up to 16 m. Keep detection technology, range, mounting and IP data model-specific.

High-Bay & Long-Range Detection

Reviewed EBDHS products target high-ceiling applications. EBDHS-MB-PRM is listed with up to 40 m floor-diameter detection, optimum 15 m mounting height and IP65 protection; EBDHS-PRM has different mounting data. Do not merge variants.

Photocells & Daylight Control

ALC-AD uses 1-10V analogue dimming, while ALC-DD uses DALI/DSI digital dimming and is listed for up to 10 dimming drivers or ballasts. Protocol and driver compatibility are key selection fields.

Dimming & Lighting Control Modules

Reviewed products include AR-DN-D-A, a 500W trailing-edge dimmer for specified capacitive/resistive lighting loads, plus DALI and 0-10V / 1-10V variants. Expose connected load, protocol and interface.

Vitesse Systems

Vitesse Plus and Vitesse Modular products represented include VITP7-EBDSPIR and VITM4-E. Preserve the system family, RJ45 or other interface, number of outputs and expansion relationships.

RAPID, An-10 & Scene Controls

Reviewed examples include EBR-DIN-AC-ET area controller, AR-DN-RS232 interface, RAPID UHS handset and DA-SG-4PM-W / AR-SG-4SM-W scene controls. Keep field-BUS, Ethernet, RF frequency and protocol claims exact.

Standalone Timed Controls

ELLIPSE is represented as a two-wire no-neutral time-lag switch, while MRT16-WP is an IP66 weatherproof touch-activated time-lag switch for specified loads. Expose delay range, load type and installation requirements.

CP ELECTRONICS PRODUCTS FOR AUSTRALIAN ELECTRICAL PROJECTS

CP Electronics products represented by SCHNAP support offices, commercial fit-outs, warehouses, factories and other building-control projects. Selection should follow detection technology, coverage, mounting height, IP rating, dimming/control protocol, load capability, network/system architecture and compatible accessories. System components should not be presented as interchangeable simply because they share the CP Electronics brand.

PRODUCT IDENTIFICATION FOR CP ELECTRONICS

CHOOSING CP ELECTRONICS PRODUCTS BY TECHNICAL SPECIFICATION

Useful model-level fields include sensor technology, detection range/diameter, mounting height, horizontal/vertical coverage, IP rating, lux sensing, time delay, dimming protocol, connected load, output count, driver/ballast capacity, system family, network/interface type and programming method. Do not generalise specifications from one detector, controller or system component across another.

VERIFIED PRODUCT / RANGE EXAMPLES

• GESM - PIR presence detector with lux sensing and adjustable time/lux settings; draft lists IP54.
• MWS6-PRM - microwave presence detector; draft lists 360-degree horizontal detection, up to 16 m floor diameter and IP40.
• EBDHS-MB-PRM - high-bay PIR detector; draft lists up to 40 m floor diameter, optimum 15 m mounting height and IP65.
• ALC-AD - flush photocell switch with 1-10V analogue dimming; ALC-DD - DALI/DSI photocell controller for up to 10 drivers/ballasts in the draft.
• AR-DN-D-A - reviewed 500W trailing-edge dimmer.
• VITP7-EBDSPIR - Vitesse Plus PIR detector with RJ45 connection; VITM4-E - Vitesse Modular four-output switching extender.
• EBR-DIN-AC-ET - RAPID DIN-rail area controller with field-BUS outputs, RJ45 monitoring and Ethernet connectivity.
• AR-DN-RS232 - An-10 RF/CAN to RS232 interface; draft identifies a 915 MHz Australia/New Zealand variant.
• ELLIPSE and MRT16-WP - representative standalone timed-control products.

CP ELECTRONICS TRADE PRICING FOR LICENSED ELECTRICIANS

SCHNAP does not publicly display protected licensed-electrician trade pricing. After successful electrical-licence verification and Trade Access approval, eligible protected pricing becomes available while logged in.

Apply for SCHNAP Trade Access

CP ELECTRONICS - COMMON QUESTIONS

What types of CP Electronics products does SCHNAP supply?

The reviewed catalogue includes PIR and microwave presence detectors, high-bay sensors, photocell/daylight controllers, dimming and control modules, Vitesse products, RAPID and An-10 components, scene controls and timed switches.

Which CP Electronics product is intended for high-bay applications?

The supplied draft identifies EBDHS-MB-PRM as a high-bay PIR presence detector with up to 40 m floor-diameter detection, optimum 15 m mounting height and IP65. Confirm the exact variant before selection.

What is the difference between ALC-AD and ALC-DD?

ALC-AD uses 1-10V analogue dimming. ALC-DD uses DALI/DSI digital dimming and is listed to control up to 10 dimming drivers or ballasts.

What are Vitesse, RAPID and An-10?

They are named CP Electronics lighting-control system families represented in the supplied draft. Their architectures and interfaces differ, so components should be selected by exact system and compatibility.

Does SCHNAP list DALI/DSI CP Electronics products?

Yes. Reviewed examples include ALC-DD and DA-SG-4PM-W. Confirm the exact control method and connection requirements on the product page.

Are all CP Electronics products covered by the same compliance requirements?

No. Compliance and installation requirements are product- and application-specific. Confirm the exact model and current documentation.

How do electricians access protected CP Electronics trade pricing?

Eligible licensed electricians can apply for SCHNAP Trade Access; protected pricing becomes available after successful verification while logged in.

Can I request project pricing?

Yes. Send the relevant product/model code, SCHNAP SKU, quantities and project details to service@schnap.com.au.