DC UPS Power Supply 13.5V 3.7A Wall Mount 1x 9Ah Patriot Power
Patriot Power wall mount DC UPS features 13.5V DC 3.7A output, 1 x 12V 9Ah battery fitted and lockable door. Ideal for CCTV and alarm backup.
Sign in
Please login to continue to your account.
Alternatively Known As: Patriot wall-mount DC UPS, 13.5V CCTV power supply, security alarm backup power supply, battery-backed power supply
- Model: WB-DC12-4A
- Output Voltage: 13.5V DC
- Output Current: 4A nominal; product listing specifies 3.7A
- Battery: 1 x 12V 9Ah rechargeable battery supplied and fitted
- Outputs: 9 x fused 1.85A outputs
- Battery Backup: DC UPS operation during mains failure
- Protection: Mains-fail and low-battery indication
- Enclosure: Wall-mount steel enclosure with lockable door
- Operating Temperature: -20°C to +60°C
- Humidity: 20–90% relative humidity, non-condensing
- Safety and EMC: Datasheet identifies CB/IEC 60950-1 and UL60950-1 approvals, with EN55022 and EN61000 series EMC testing
- Dimensions (H x L x W): 235mm x 92mm x 362mm
- Weight: 5.2 kg
- Maintains 13.5V DC supply to connected security equipment during mains interruption
- Supplied with one fitted 12V 9Ah battery
- Nine individually fused output terminals for distributed security loads
- Lockable wall-mount enclosure
- Mains-fail and low-battery status indication
- Suitable for CCTV, alarm, access-control and other low-voltage security systems
- Direct DC backup avoids the additional conversion stage of an AC-output UPS
- Mains-connected installation should be performed by a suitably licensed Australian electrical contractor in accordance with AS/NZS 3000. Battery polarity, output loading, ventilation and protective earthing should be checked before commissioning.
- CCTV camera and recorder backup
- Intruder alarm panels and detectors
- Access-control systems
- Intercom and security communication equipment
- Low-voltage security and monitoring systems requiring 13.5V DC backup power
- AS/NZS 3000:2018 — applicable requirements for fixed mains-connected electrical installation
- AS/NZS 62040.1 — applicable UPS safety framework to verify for the complete DC UPS assembly
- AS/NZS 60335.2.29 — applicable battery-charger safety requirements to verify for the charging function
- Supplied sealed lead-acid battery can be recovered and recycled through approved battery-recycling channels
- Direct DC backup can reduce conversion losses compared with an AC-output UPS used with DC security equipment
- Replaceable battery design can extend enclosure service life and reduce complete-unit disposal
- Battery-backed operation helps prevent premature replacement of CCTV and alarm equipment caused by power interruptions
No Patriot Power product-specific warranty period was located. Warranty is subject to the supplier or manufacturer’s current terms and Australian Consumer Law; confirm coverage at purchase.
Available through Patriot Power Supplies and authorised Australian security, electrical and wholesale distributors; live stock should be confirmed before ordering.
