Ethernet Cable M12 4P Straight To M12 4P Angled Shielded 5m SICK
Designed for industrial automation networks, this SICK M12 4P Ethernet cable runs a straight connector to an angled connector for compact panel and drag chain routing. The 5m shielded PUR cable is IP65/IP66K/IP67 rated and supports PROFINET Ethernet with CAT5e transmission characteristics. Operating temperature spans -40°C to +85°C at the head depending on installation position, with a halogen-free PUR jacket compliant with AS/NZS 3000 wiring rules. Technical specs and installation notes are listed below.
Sign in
Please login to continue to your account.
- Connection type head A: Male connector, M12, 4-pin, straight, D-coded
- Connection type head B: Male connector, M12, 4-pin, angled, D-coded
- Locking plug connector: Screw connection
- Connector material: TPU
- Locking nut material: Zinc die-cast, nickel-plated
- Cable length: 5 m
- Cable type: 4-wire, PUR, halogen-free
- Cable diameter: 6.7 mm
- Conductor cross section: 0.34 mm²
- Shielding: Shielded
- Bending radius: Flexible use > 12 x cable diameter, Stationary position > 5 x cable diameter, Drag chain operation > 12 x cable diameter
- Operating temperature: Flexible use -30°C to +70°C, Stationary position -40°C to +80°C, Drag chain operation -30°C to +70°C, Head -25°C to +85°C
- Nominal voltage: 300 V AC
- Test voltage: 2000 V AC
- Rated impulse voltage: 1.5 kV
- Current loading: 4 A
- Signal type: Ethernet, PROFINET
- Transmission characteristics: CAT5e
- Data transmission rate: ≤ 0.1 Gbit/s
- Enclosure rating: IP65 / IP66K / IP67
- Contamination rating: 3
- Insulation resistance: > 100 MΩ
- Overvoltage category: III
- Thermal resistance: Flame retardant acc. to UL 1581 Section 1090, Section 1100 (FT2), IEC 60332-1-2 Std.
- Dimensions (H x L x W): 13mm x 5000mm x 13mm
- Weight: 0.2 kg
- Male M12 4-pin connectors, straight and angled, D-coded
- Shielded PUR halogen-free cable, 5 meters long
- High bending radius suitable for flexible and drag chain use
- Operating temperature range from -40°C to +85°C depending on use
- IP65 / IP66K / IP67 rated for robust environmental protection
- Supports Ethernet PROFINET with CAT5e transmission characteristics
- Rated for 4 A current loading and 300 V AC nominal voltage
- Flame retardant cable according to UL 1581 and IEC 60332-1-2 standards
- Installation by a qualified technician or electrician is recommended to ensure proper connection and compliance with industrial network standards.
- Industrial automation networks
- Drag chain operation in zones with oils and lubricants
- PROFINET Ethernet data transmission
- AS/NZS 3000 – Wiring Rules (Electrical Installation)
- Halogen-free PUR jacket reduces environmental impact during disposal
- Durable design minimizes replacement frequency and electronic waste
Standard manufacturer warranty applies; please refer to SICK for specific warranty terms.
The SICK YM2D24-050PN1N2D24 PROFINET Ethernet Cable is available for immediate purchase, ideal for industrial automation and drag chain applications requiring robust and reliable Ethernet connectivity.
Q: What's the difference between the two connector ends on this cable?
A: One end has a straight M12, 4-pin, D-coded male connector and the other has an angled M12, 4-pin, D-coded male connector, both with screw-locking connections.
Q: Is this cable rated for outdoor or wet environments?
A: Yes, it carries an IP65/IP66K/IP67 enclosure rating, and orders ship Australia-wide with SCHNAP's reliable delivery network.
Where a longer run is needed, the 10m version of the M12 4P straight to angled shielded ethernet cable covers extended panel-to-device distances.
A shielded M12 5P CAN cable is also available for CAN bus wiring on the same equipment.
For higher throughput requirements, an M12 push-pull CAT6a industrial ethernet cable is available in the same connector style.Order with confidence — SCHNAP offers a 30-day return policy on electrical products.
