Trade Discount 25%
Ethernet Module 10/100 Mbit Email Notifications Ness
Ness Ethernet module features a secure connection, email notifications and 10/100 Mbit speed. Ideal for M1 alarm system network communications.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Ness M1XEP Ethernet Interface, Ness M1 Ethernet Adapter, M1 Ethernet Port Bus Expander
Technical Specifications
- Model: M1-XEP
- SKU: 101-215
- Network Interface: IEEE 802.3 compliant 10/100 Mbit Ethernet
- Network Connector: RJ45 8-pin jack
- Serial Interface: RS-232, DB9 male 9-pin
- Protocols: TCP, UDP, DHCP, SSL/TLS, HTTP, SMTP and NTP
- Security: Password protection, HTTPS encryption and FIPS 128-bit encryption
- Email Notifications: SMTP event notification, supporting up to 16 addresses
- Operating Voltage: 12 V DC
- Current Draw: Approximately 300 mA
- Power Connector: 2.1 mm centre-positive barrel connector
- Network Configuration: DHCP or static IP address
- Firmware: Flash memory for firmware updates
- Status Indicators: Power, link and data LEDs
- Compatible System: Ness M1 family control panels
- Serial Baud Rate: 115,200 baud factory default
- Dimensions (H x L x W): 108mm x 162mm x 54mm
- Weight: 0.45 kg
Key Features
- Connects a Ness M1 control panel to an Ethernet network
- Provides email event notifications using SMTP
- Supports secure password-protected and HTTPS connections
- Integrated 10/100 Mbit Ethernet interface
- Supports DHCP and static IP network configuration
- Provides remote internet monitoring and reporting capability
- Includes RS-232 serial connection to M1 control port 0
- Supports firmware updates through onboard flash memory
- Includes power, link and data status indicators
Professional Installation Requirements
- Installation and configuration should be performed by a suitably qualified security installer or network professional. Connect to the M1 control panel RS-232 port, configure the Ethernet network and provide a suitable 12 V DC supply in accordance with the Ness installation manual. Any mains-powered network equipment and power supply should be protected by an appropriately sized UPS where continued operation during brief outages is required.
Applications
- Network communication for Ness M1 alarm and automation control systems
- Email notification of alarm, trouble and automation events
- Remote M1 system programming and monitoring over Ethernet
- Connection of M1 control panels to LAN, WAN or internet networks
- Alarm event reporting to compatible central monitoring infrastructure
Standards & Compliance
- AS/NZS 2201.5:2008 is relevant to alarm transmission systems when this module is incorporated into an applicable intruder alarm transmission installation; no specific manufacturer compliance declaration for the module was located.
- AS/NZS 3820 is relevant as a general essential safety reference for applicable low-voltage electrical equipment; specific product compliance was not stated by the manufacturer.
Environmental Benefits
- Low operating demand of approximately 300 mA at 12 V DC helps limit ongoing energy consumption.
- Firmware update capability can extend the useful service life and reduce premature electronic replacement.
- Network-based event reporting can reduce reliance on dedicated legacy telephone-line communication infrastructure.
- Reusable electronic housing and circuit-board assembly support repair or replacement of the module rather than an entire alarm system.
Warranty Information
Ness Corporation provides a three-year warranty against defects from the date of purchase for Ness-manufactured products or products supplied by Ness, unless otherwise specified. Return freight, removal, reinstallation and damage caused by misuse, lightning or power surges may be excluded under the warranty terms.
Available Now
Available through Ness Corporation and authorised Australian security-system distributors.
