EzyStrut

SHOP EZYSTRUT PRODUCTS BY CATEGORY

Cable Tray - ET3 & ET5

ET3150G is a reviewed 150mm tray with 43mm cable-laying depth and 3m length. ET3 examples extend to 600mm width. ET5 uses 78mm laying depth with reviewed widths of 150, 300, 450 and 600mm, plus matching accessories.

Cable Ladder

N2L600H is a NEMA 2 ladder, 75mm laying depth, 600mm width and 6m length, with the draft specifying up to 113kg/m over 4m. N3L150H is NEMA 3, 115mm depth, 150mm width, 6m, with up to 209kg/m over 4m and NEMA 20B loading requirements.

Cable Mesh

EM215065PG is a reviewed pre-galvanised mesh tray, 65mm high x 150mm wide x 3m, with matching mesh-joining hardware represented in the SCHNAP range.

Strut / Channel

E1000SH is a reviewed slotted 41 x 41mm, 2.5mm, 6m hot-dip galvanised channel. E3300H is 41 x 21mm, 2.5mm, 6m hot-dip galvanised.

Accessories & Structural Support

ET3HDG is an ET3 tray hold-down. CB2-600H is a 600mm cantilever bracket based on E1000 channel. E3087H is a beam clamp; the draft states 398kg load rating when used as a pair and attributes this to NATA-certified lab testing. E1006H is an M6 long-spring channel nut.

Cable Duct

DCO5050G is a reviewed 50 x 50mm galvanised sheet-steel duct with spring-fit lid and built-in splice.

EZYSTRUT PRODUCTS FOR AUSTRALIAN PROJECTS

Treat EzyStrut as a connected support system: choose tray/ladder/mesh/duct by cable quantity, dimensions, laying depth, span and load; then match channel, hold-downs, joiners, brackets, clamps and fasteners to the exact family/configuration. Finish selection is also model/order-code specific.

CHOOSING EZYSTRUT PRODUCTS BY TECHNICAL SPECIFICATION

Prioritise system family, width, cable-laying depth, length, span/load conditions, channel profile/thickness, finish and exact accessory compatibility. Standards cited for one steel grade, finish or SKU must not be inherited across the whole range.

VERIFIED PRODUCT / RANGE EXAMPLES

• ET3150G / ET3450G / ET3600G - reviewed ET3 tray examples with 43mm laying depth.
• ET5 - reviewed 78mm-depth tray family with multiple widths.
• N2L600H - NEMA 2 ladder; draft states up to 113kg/m over 4m.
• N3L150H - NEMA 3 ladder; draft states up to 209kg/m over 4m and NEMA 20B loading.
• EM215065PG - reviewed 65 x 150mm pre-gal mesh tray.
• E1000SH / E3300H - reviewed hot-dip galvanised channel profiles.
• ET3HDG / CB2-600H / E3087H / E1006H - reviewed support accessories.
• DCO5050G - reviewed 50 x 50mm enclosed cable duct.

EZYSTRUT TRADE PRICING FOR LICENSED ELECTRICIANS

Eligible protected pricing becomes available while logged in after successful licence verification and Trade Access approval. Keep public, protected trade and project pricing as distinct concepts.

EZYSTRUT - COMMON QUESTIONS

What EzyStrut systems does SCHNAP list?

Cable tray, cable ladder, mesh tray, strut/channel, cable duct and support accessories are represented in the supplied draft.

What is the difference between ET3 and ET5 tray?

The reviewed ET3 family has 43mm laying depth; ET5 has 78mm laying depth. Width depends on exact ordering code.

How do NEMA 2 and NEMA 3 ladder examples differ?

N2L600H is 75mm deep and the draft states 113kg/m over 4m; N3L150H is 115mm deep and states 209kg/m over 4m plus NEMA 20B loading requirements.

Which EzyStrut channel is slotted 41 x 41mm?

E1000SH, supplied in 6m length with 2.5mm thickness in the reviewed listing.

How should I choose finish?

By exact product, environment and ordering code. The draft includes pre-galvanised and hot-dip galvanised examples and notes selected stainless options.

Can I mix accessories between tray families?

Do not assume so. Use the exact compatible joiner, hold-down, bracket or fastener for the selected family/configuration.

Can I request project pricing?

Yes. Send exact codes, quantities and project details to service@schnap.com.au.