Fantech

SHOP FANTECH PRODUCTS BY CATEGORY

Domestic Exhaust Fans

EDM Series covers compact wall/ceiling exhaust fans. SCHNAP lists EDM-100S-12V, a reviewed 100mm 12V model. VCW202 Vogue is a reviewed 200mm, 220-240V exhaust fan.

Inline Duct Fans

TD-250/100 is listed for 100mm ducting and TD-500/150SIL for 150mm ducting. The draft identifies Mixvent mixed-flow inline fans and TD Silent as a lower-noise ducted range.

Supply Fans

ECE152SM is a reviewed 150mm supply fan with 230V single-phase 50/60Hz supply, IP44, galvanised steel construction and replaceable G2 filter.

Ducting, Grilles & Accessories

DUCT150-6M is a reviewed 150mm x 6m flexible duct. RCG200-150 is a reviewed Ritevent ceiling grille. The draft also identifies branch take-offs, reducers, inlet components and backdraft dampers.

Controls & Timers

TSS1-15 is a reviewed two-speed surface switch designed for the Fantech Mixvent range. VZ24C provides an adjustable 1-20 minute run-on delay on 240V 50Hz fan circuits. Confirm exact fan/control compatibility.

Commercial & Industrial

RP254 Ring Plate fan and CPD0354F Compact 2000 are reviewed examples; CPD0354F is a 350mm three-phase model with IP55 protection.

FANTECH PRODUCTS FOR AUSTRALIAN PROJECTS

Start with exhaust versus inline extraction versus supply air. Then size around duct diameter, airflow/system resistance, mounting and noise, followed by voltage/phase, IP rating, speed/timer requirements and compatible grilles, ducting, dampers, reducers or attenuators. For larger systems, confirm the complete fan/duct/accessory configuration before procurement.

CHOOSING FANTECH PRODUCTS BY TECHNICAL SPECIFICATION

Prioritise fan type, duct diameter, airflow, system pressure/resistance, sound level, voltage/phase, IP, mounting and control/accessory compatibility. Avoid treating duct diameter alone as sufficient fan sizing.

VERIFIED PRODUCT / RANGE EXAMPLES

• EDM-100S-12V - reviewed 100mm 12V compact exhaust fan.
• VCW202 Vogue - reviewed 200mm, 220-240V exhaust fan.
• TD-250/100 / TD-500/150SIL - reviewed inline fan examples for 100/150mm ducting.
• ECE152SM - reviewed 150mm IP44 supply fan with replaceable G2 filter.
• DUCT150-6M / RCG200-150 - reviewed duct and grille examples.
• TSS1-15 / VZ24C - reviewed speed-control and run-on timer examples.
• RP254 / CPD0354F - reviewed commercial/industrial fan examples; CPD0354F is 350mm, three-phase, IP55.

FANTECH TRADE PRICING FOR LICENSED ELECTRICIANS

Eligible protected pricing becomes available while logged in after successful licence verification and Trade Access approval.

FANTECH - COMMON QUESTIONS

What Fantech products does SCHNAP list?

The draft identifies domestic exhaust fans, inline duct fans, supply fans, ducting, grilles, airflow accessories, controls/timers and commercial/industrial fans.

What is the difference between an exhaust fan and inline fan?

A wall/ceiling exhaust fan sits at or near the room opening; an inline fan sits within the duct run. Selection depends on layout and required air performance.

Which Fantech products are relevant to bathrooms?

The draft identifies EDM-100S-12V and VCW202 among products used for bathroom/kitchen ventilation, subject to exact installation requirements.

Can Fantech fans use speed controllers or timers?

Selected models can. TSS1-15 is designed for Mixvent, while VZ24C is a 1-20 minute 240V run-on timer. Confirm compatibility with the exact fan.

What should I check before choosing a Fantech fan?

Fan duty, duct diameter, airflow/system resistance, noise, voltage/phase, mounting, IP and required controls/accessories.

How do I identify the right Fantech product?

Use the exact model/product code and the SCHNAP SKU shown on the product page; do not rely on size or series name alone.

Can I request Fantech project pricing?

Yes. Send exact product details and quantities to [email protected].