FDG

SHOP FDG PRODUCTS BY CATEGORY

Strut Channel

A-FDG3000TP is a reviewed 41 x 21 x 2.5mm slotted pre-galvanised steel strut in 6m length. The draft also identifies a 41 x 41mm strut option.

Brackets & Cantilever Supports

A-FDG1325G is a reviewed 90 degree four-hole angle bracket, 90 x 105mm, hot-dip galvanised. A-FDGCBU1000G is a 1000mm unbraced hot-dip galvanised cantilever bracket; the draft also lists 300, 470, 600, 700, 780 and 930mm configurations.

Strut Nuts & Threaded Rod

A-NUTM10SLSZ is a zinc-plated M10 long-spring strut nut explicitly stated to suit M10 threaded rods/bolts. A-TR4610X3000G is M10 x 3000mm, grade 4.6, galvanised and fully threaded.

Anchors & General Fasteners

A-MSA12X60G is a reviewed M12 x 60 galvanised sleeve anchor stated as suitable for concrete, brick and masonry. Other reviewed examples include A-SS4610X25Z set screw, A-W8X16X1.6Z washer and A-NUTM10H5G nut.

FDG PRODUCTS FOR AUSTRALIAN PROJECTS

When selecting support assemblies, consider the load/support requirement, strut geometry, bracket configuration, thread size, fixing substrate and finish. The M10 spring nut is suitable for M10 threaded rods/bolts. Compatibility between unrelated components should not be assumed.

CHOOSING FDG PRODUCTS BY TECHNICAL SPECIFICATION

Prioritise profile dimensions, thickness, length, thread size, strength grade, finish, bracket geometry, substrate and explicit component compatibility.

VERIFIED PRODUCT / RANGE EXAMPLES

• A-FDG3000TP - 41 x 21 x 2.5mm, 6m slotted pre-galvanised strut.
• A-FDG1325G - 90 degree four-hole hot-dip galvanised angle bracket.
• A-FDGCBU1000G - 1000mm unbraced cantilever bracket.
• A-NUTM10SLSZ - M10 long-spring strut nut, explicitly compatible with M10 rod/bolts.
• A-TR4610X3000G - M10 x 3000mm grade 4.6 galvanised threaded rod.
• A-MSA12X60G - M12 x 60 sleeve anchor listed for concrete, brick and masonry.

FDG TRADE PRICING FOR LICENSED ELECTRICIANS

Eligible protected pricing becomes available while logged in after successful licence verification and Trade Access approval.

FDG - COMMON QUESTIONS

What FDG products does SCHNAP list?

Slotted strut, brackets, cantilever supports, strut nuts, threaded rod, anchors, washers, screws, nuts and related fastening hardware.

What should I check when choosing FDG strut?

Check channel dimensions, thickness, length, slotting and finish. A-FDG3000TP is 41 x 21mm, 2.5mm thick and 6m long.

Which FDG anchor is listed for masonry?

A-MSA12X60G is stated in the draft as suitable for concrete, brick and masonry.

Can an FDG M10 spring nut be used with M10 threaded rod?

The reviewed A-NUTM10SLSZ is explicitly stated to be compatible with M10 threaded rods and bolts.

What matters when selecting threaded rod?

Diameter, length, strength grade, finish and thread type.

How do electricians access FDG trade pricing?

Through SCHNAP Trade Access after successful licence verification and approval.

Can I request FDG project pricing?

Yes. Send exact products and quantities to [email protected].