Fire Factory Australia

SHOP FIRE FACTORY AUSTRALIA PRODUCTS BY CATEGORY

Fire Extinguishers

FFA45ABE is a reviewed 4.5kg ABE dry-chemical extinguisher with wall bracket; its page states AS/NZS 1841.5. FFA90AW is a 9L air-water extinguisher for Class A fires. FFA35CO is a 3.5kg CO2 unit stated for Class B and electrical-fire applications.

Emergency & Exit Lighting

EX50-BODY is a reviewed 4W wide-body LED emergency light with lithium battery. FFASP3WB is a 3W recessed emergency light with adjustable 80/140mm dish sizes. EXAWSS-GR is an exit sign with audible alarm and is listed to AS/NZS 2293. AC-BATTEX is a replacement lithium battery.

Detection & Testing

5151RAUS is a conventional rate-of-rise thermal detector with 63C activation and conventional-panel context. B401AUS is a conventional detector base. A5-001 is a 250ml smoke-detector tester.

Wet Fire Equipment

FHR36 is a reviewed 19mm x 36m complete hose reel; FHR36SS is a stainless-steel variant. SD-BVR65STZ is a 304 stainless booster valve with grooved 4-inch rear outlet and two 65mm Storz inlets.

Passive Fire Protection

FyreCOLLAR-PHRC-150 is an intumescent hinged retrofit collar for specified plastic-pipe/conduit/service penetrations, with the draft stating 25-150mm pipe sizes. FP10 is a fire-resistant pillow for openings around pipes, cables and ducts.

Signage & Accessories

Reviewed examples include extinguisher/fire-action/hose-reel signage, BBCL CO2 identification band and FFA-SSCT200 304SS cable ties. Match accessories to exact equipment and dimensions.

FIRE FACTORY AUSTRALIA PRODUCTS FOR AUSTRALIAN PROJECTS

Fire protection procurement should start with the hazard/system task, then exact model and product-level standard/application. Extinguishers require fire-class and agent selection; detection requires panel/device compatibility; passive fire products require tested penetration/substrate/service configurations; wet fire equipment requires system-level connection and dimensional checks.

CHOOSING FIRE FACTORY AUSTRALIA PRODUCTS BY TECHNICAL SPECIFICATION

Check the extinguishing agent, fire class and capacity; emergency-light mounting and battery; detector type/activation and panel compatibility; hose dimensions/connections; and passive-fire penetration, substrate and service configuration. Confirm the standard stated for the exact product rather than assuming it applies across the brand.

VERIFIED PRODUCT / RANGE EXAMPLES

• FFA45ABE - 4.5kg ABE dry chemical; draft cites AS/NZS 1841.5.
• FFA90AW / FFA35CO - reviewed water and CO2 extinguisher examples.
• EX50-BODY / FFASP3WB / EXAWSS-GR - reviewed emergency/exit products.
• 5151RAUS / B401AUS / A5-001 - reviewed detection and maintenance products.
• FHR36 / FHR36SS / SD-BVR65STZ - reviewed wet-fire examples.
• FyreCOLLAR-PHRC-150 / FP10 - reviewed passive-fire examples.

FIRE FACTORY AUSTRALIA TRADE PRICING FOR LICENSED ELECTRICIANS

Eligible protected pricing becomes available while logged in after successful licence verification and Trade Access approval.

FIRE FACTORY AUSTRALIA - COMMON QUESTIONS

What Fire Factory products does SCHNAP list?

The draft identifies extinguishers, emergency/exit lighting, detection/testing, hose reels and wet-fire equipment, passive fire protection, signage, batteries and related hardware.

How do I choose ABE versus CO2?

Use the exact fire class/application. The draft describes FFA45ABE for A, B and E classes, while FFA35CO is stated for Class B and electrical-fire applications.

What should I check for emergency lighting?

Mounting format, dimensions, power, battery and product-specific installation/compliance information.

Which products support detector maintenance?

The reviewed range includes 5151RAUS thermal detector, B401AUS base and A5-001 smoke-detector tester.

Are all Fire Factory products compliant with the same standard?

No. Standards must remain product-specific; the draft gives different examples for extinguishers, exit lighting and hose reels.

Can Fire Factory products be used for passive fire stopping?

Selected products can. Confirm the exact tested penetration, service dimensions, substrate and configuration.

Can I request project pricing?

Yes. Send exact product codes and quantities to service@schnap.com.au.