Trade Discount 25%
Internal Battery Pack 30x 12V 9Ah to Suit 30kVA Tower UPS PMU
PMU internal battery pack features 30 x 12V 9Ah sealed batteries to suit 30kVA PMU tower UPS. Ideal for factory-fitted UPS backup runtime.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: PMU-30 UPS Battery Pack, PMU-T 30kVA Replacement Battery Pack, 30kVA UPS Internal Battery Assembly, Sealed Lead-Acid UPS Battery Bank
Technical Specifications
- Battery Quantity: 30 batteries
- Nominal Battery Voltage: 12V per battery
- Nominal Battery Capacity: 9Ah per battery at 20-hour rate
- Battery Chemistry: Sealed lead-acid, valve-regulated type
- Nominal Battery Bank Voltage: Approximately 360V DC when connected in series
- Nominal Battery Bank Energy: Approximately 3.24kWh
- Terminal Type: Typically 6.3mm/F2 tab terminals; verify against the installed PMU UPS
- UPS Compatibility: PMU 30kVA tower UPS
- Installation Type: Internal, factory-fitted replacement battery pack
- Battery Standard Reference: IEC 60896-21 and IEC 60896-22 are commonly applicable to stationary valve-regulated lead-acid batteries
- Pack Dimensions: Estimated from the PMU tower UPS cabinet envelope; confirm before ordering
- Pack Weight: Approximately 81kg based on 30 batteries at approximately 2.7kg each
- Dimensions (H x L x W): 868mm x 900mm x 250mm
- Weight: 81 kg
Key Features
- Configured specifically for PMU 30kVA tower UPS systems
- Includes 30 matched 12V 9Ah sealed rechargeable batteries
- Provides replacement backup energy storage for factory-fitted UPS installations
- Sealed, non-spillable lead-acid construction suitable for stationary UPS applications
- Preconfigured battery assembly reduces individual battery selection and compatibility issues
- Replacement pack supports restoration of designed UPS backup runtime when installed and commissioned correctly
Professional Installation Requirements
- Installation and commissioning should be performed by a suitably qualified UPS technician or licensed electrician. Isolate mains and DC battery sources before service, follow PMU service procedures, use appropriate battery-handling PPE, and verify polarity, torque, charging voltage and battery string configuration before returning the UPS to service.
Applications
- Replacement internal battery pack for PMU 30kVA tower UPS systems
- Factory-fitted UPS backup runtime restoration
- Critical power protection for servers, telecommunications, medical, industrial and commercial equipment
- Preventive UPS battery replacement during scheduled maintenance
Standards & Compliance
- AS 3011.2: Electrical installations — Secondary batteries installed in buildings — Sealed cells
- AS 62040.1.1: Uninterruptible power systems — General and safety requirements for UPS used in operator access areas
- AS/NZS 3000: Electrical installations — Wiring Rules, where the battery pack forms part of the connected electrical installation
Environmental Benefits
- Sealed lead-acid batteries are widely recyclable through approved battery recycling channels, allowing recovery of lead and other materials
- Replaceable internal batteries can extend the service life of the PMU UPS and reduce premature disposal of the complete UPS
- Supports continued use of an energy-efficient online UPS system rather than replacing the entire power-protection installation
- Battery recycling and disposal should be undertaken through an authorised Australian battery recycler; do not place batteries in general waste
Warranty Information
PSS standard warranty information states a 2-year return-to-base warranty for PSS products from the original purchase date, subject to installation, operating and battery-maintenance conditions. Confirm whether the replacement battery pack is covered under the same terms at purchase.
Available Now
Available through PMU/PSS channels and authorised Australian UPS distributors, subject to configuration and replacement-part availability.
