Trade Discount 25%
Maxbond Pro V2 Construction Adhesive 680g Tan H.B. Fuller
H.B. Fuller Maxbond Pro V2 construction adhesive features high-strength grab, a 680g cartridge size and tan colour. Ideal for bonding building materials on site.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Maxbond Pro Adhesive Foam, MaxBond Pro Gun Construction Adhesive
Technical Specifications
- Formulation: Single‑component polyurethane foam adhesive with CFC‑free propellant
- Yield: ~270 m of 12 mm bead or ~1050 m of 6 mm bead per 680 g canister
- Open/skin time: ~15 minutes at 20 °C, 50 % RH
- Cure rate: Initial cure ~2 hours; full cure in ~7 days
- Service temperature: –40 °C to +90 °C when cured
- Specific gravity: Approx. 25 kg/m³ (extruded, fully cured)
- Curing system: Moisture‑cure
- Dimensions (H x L x W): 230mm x 70mm x 70mm
- Weight: 0.75 kg
Key Features
- High yield equivalent to 30× 300 g cartridges
- Resealable and reusable with gun applicator
- Long open time allows adjustment before bonding
- Excellent adhesion to timber, plywood, particleboard and concrete
- Suitable for wet, dry or green timber
Applications
- Bonding timber subfloors to timber joists
- Bonding panelling to timber studs
- Use on plywood, particleboard, plasterboard, fibre cement, concrete joists
Standards & Compliance
- Likely falls under AS/NZS 2754.1 for isocyanate/polyurethane adhesives gelation method
Environmental Benefits
- CFC‑free propellant is ozone‑friendly
Warranty Information
H.B. Fuller provides a limited warranty that the product is manufactured to specification; in case of valid claim they will replace or refund the product, subject to terms of sale and Australian Consumer Law ([hbfuller.com](https://www.hbfuller.com/-/media/project/hbfuller/hbfuller/files/conditions-of-sale/apac/australia-new-zealand.pdf?utm_source=openai)).
Available Now
Available through authorised Australian distributors; local stock varies by location.
