Trade Discount 25%
Multi I/O Transmitter AX PRO Hikvision
Hikvision multi I/O transmitter features multiple inputs and outputs in the AX PRO range. Ideal for alarm systems.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Hikvision DS-PM1-I16O2-WB, AX PRO Wireless Multi-IO Transmitter, 16-Input 2-Output Alarm Expander
Technical Specifications
- Model: DS-PM1-I16O2-WB
- Wireless Frequency: 433 MHz
- Wireless Communication: Two-way, 2GFSK modulation
- Wireless Range: Up to 800 m in open area
- Alarm Inputs: 16
- Alarm Outputs: 2 relay outputs
- Power Outputs: 2 x 12 V outputs, total 1 A
- Power Supply: 100–240 VAC, 30 W
- Backup Battery: Compatible with 12 V 7 Ah battery
- Backup Operation: Up to 36 hours, dependent on battery and load
- End-of-Line Resistance: 1 kΩ, 2.2 kΩ, 4.7 kΩ or 8.2 kΩ
- Operating Temperature: −10°C to 40°C
- Operating Humidity: 10% to 90% RH, non-condensing
- Installation: Wall mounted
- Housing Material: Plastic
- Colour: White
- Dimensions (H x L x W): 199mm x 261mm x 86.4mm
- Weight: 0.975 kg
Key Features
- Connects up to 16 existing wired detectors to a Hikvision AX PRO wireless alarm system
- Provides two alarm relay outputs for local equipment or alarm control interfaces
- Two 12 V power outputs can supply compatible external wired detectors
- Two-way wireless communication with 433 MHz radio transmission
- LED indicators show power, fault and signal status
- Front and rear tamper protection
- Remote configuration through the Hik-Connect or installer application
- Suitable for upgrading existing wired alarm installations without replacing compatible detectors
Professional Installation Requirements
- Installation should be carried out by a suitably qualified security installer or licensed electrical contractor. The unit includes a 100–240 VAC mains supply, backup battery connections and alarm-system wiring; install and commission in accordance with applicable local requirements and AS/NZS 2201.1.
Applications
- Hybrid residential intrusion alarm systems
- Commercial security alarm systems
- Connecting wired PIR, reed, outdoor and other compatible detectors to AX PRO
- Modernising existing wired alarm installations
- Alarm relay and auxiliary output control applications
Standards & Compliance
- AS/NZS 2201.1:2007 – Intruder alarm systems, client premises: design, installation, commissioning and maintenance; applicable to the complete alarm installation rather than confirming product-specific certification
- ACMA radiocommunications requirements apply to the 433 MHz wireless transmitter; verify the Australian-approved variant and RCM requirements before installation
Environmental Benefits
- Allows compatible existing wired detectors to be retained, reducing replacement waste during alarm-system upgrades
- Supports longer service life for installed security equipment by combining legacy wired devices with a modern AX PRO platform
- Low-voltage 12 V outputs support efficient operation of compatible external detectors
Warranty Information
Warranty is subject to Hikvision Australia and the authorised distributor’s terms. Australian distributor listings for this model commonly state a 2- to 3-year warranty; confirm the applicable period and conditions at purchase. Hikvision Australia warranty support generally requires purchase through an authorised distribution channel.
Available Now
Available through Hikvision and authorised Australian security-system distributors, subject to regional stock and the correct 433 MHz Australian variant.
