Trade Discount 25%
Network Access Controller 4 Door 250K Users Ethernet Tecom
Tecom network access controller features 4 doors, 250K users and Ethernet connectivity. Ideal for commercial access control systems.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom NAC, TS1066-4 Network Access Controller, 4-Door Access Controller
Technical Specifications
- Door Capacity: 4 doors
- User Capacity: Up to 250,000 users in IP Direct Mode
- Door Groups: Up to 10,000
- Event History: Up to 50,000 events
- Network Interface: On-board 10/100 Mbps Ethernet
- Inputs: 8 onboard inputs
- Relays: 4 onboard relays
- Reader Support: Up to 6 readers per door with configurable in/out combinations
- Communications: 1 x RS-485 ChallengerPlus LAN and 2 x RS-485 reader/expander buses
- Credential Format: Up to 128-bit card data
- PIN Capacity: 10-digit user PINs
- Memory: 256 MB RAM
- Input Voltage: 16–18 VAC, 100 VA
- Operating Temperature: 0–50 °C
- Relative Humidity: Up to 95% non-condensing
- Regulatory Marking: ACMA C-Tick for Australia and New Zealand
- Dimensions (H x L x W): 592.4mm x 408.3mm x 119.2mm
- Weight: 12 kg
Key Features
- Controls up to four access-controlled doors
- Ethernet connection for direct management-software integration
- Supports up to 250,000 users when configured in IP Direct Mode
- Stores up to 50,000 access events locally
- Compatible with Tecom RS-485 readers and expanders, OSDP v2, Aperio and Salto devices
- Supports ChallengerPlus integration for combined access and intrusion applications
- Remote firmware upgrade capability
- Configurable door override schedules and lock/unlock actions
- Expandable relay and input functionality
- Advanced power, battery-management and diagnostic functions
Professional Installation Requirements
- Installation, wiring and commissioning should be completed by a qualified electronic-security or electrical installer. Configure the controller in accordance with the manufacturer’s installation instructions, applicable electrical requirements and the selected access-control system design.
Applications
- Commercial building access control
- Office and business premises
- Retail and industrial facilities
- Multi-door staff and contractor access systems
- Access and intrusion integration with Tecom ChallengerPlus systems
- Lift and controlled-entry applications
Standards & Compliance
- AS/NZS IEC 60839.11.1:2019 is the relevant Australian/New Zealand framework for electronic access-control system and component requirements; project-specific compliance should be verified by the system integrator.
- ACMA C-Tick regulatory compliance is stated in the manufacturer datasheet for Australia and New Zealand.
Environmental Benefits
- Remote firmware upgrades can extend service life and reduce replacement-related electronic waste.
- Expandable inputs, relays and reader connectivity support system upgrades without replacing the complete controller.
- Local event storage and Ethernet management can reduce the need for additional dedicated access-control hardware.
Warranty Information
Tecom Challenger hardware is listed with a 5-year warranty under the Carrier Fire & Security Australia warranty policy, subject to the applicable terms, proof of purchase and verification of the fault.
Available Now
Available through Tecom/Aritech channels and authorised Australian security-system distributors.
