Trade Discount 25%
Network Access Controller PCB 4 Door 250K Users Ethernet Tecom
Tecom network access controller PCB features 4 doors, 250K users and onboard Ethernet. Ideal for access control upgrades and replacements.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom NAC PCB, 4-Door Network Access Controller Board, Tecom TS1066B-4
Technical Specifications
- Model: TS1066B-4
- Controller Type: Network Access Controller PCB, board only
- Door Capacity: 4 doors or lifts
- User Capacity: Up to 250,000 users in IP Direct mode; up to 65,535 users in Classic mode
- Door Groups: Up to 10,000 in IP Direct mode
- Event History: Up to 50,000 events
- Ethernet: Onboard 10/100 Mbps
- Memory: 256 MB RAM
- Inputs: 8 onboard inputs
- Relays: 4 onboard relays with relay expansion support
- Reader Support: Up to 6 readers per door
- Communications: 1 x RS-485 ChallengerPlus LAN and 2 x RS-485 local buses
- Protocols and Devices: Tecom RS-485, OSDP v2, Aperio and Salto
- Credential Support: Up to 128-bit card data and 10-digit user PINs
- Scheduled Actions: Up to 100 programmable actions
- Operating Temperature: 0°C to 50°C
- Relative Humidity: Up to 95% non-condensing
- Input Voltage: 19 VAC nominal; 15–24.5 VAC operating limits
- Firmware: Remote flash firmware upgradeable
- Form Factor: PCB only for installation in a compatible enclosure
- Dimensions (H x L x W): 55mm x 254mm x 110mm
- Weight: 0.33 kg
Key Features
- Controls up to four doors or lifts on one network access controller
- Supports up to 250,000 users when connected directly to supported management software
- Onboard Ethernet provides direct IP connection to management software
- Compatible with Tecom ChallengerPlus systems for access and intrusion applications
- Supports Tecom RS-485 readers and expanders, OSDP v2, Aperio and Salto devices
- Four onboard relays and eight onboard inputs
- Up to six readers can be assigned per door in entry and exit configurations
- Remote firmware upgrades support ongoing system maintenance
- Supports scheduled lock, unlock, enable and disable actions
- PCB-only format suits retrofit applications and custom enclosure installations
Professional Installation Requirements
- Installation should be performed by a qualified security systems technician or suitably qualified service person. The PCB must be mounted in a compatible enclosure and connected in accordance with the manufacturer's installation manual, applicable electrical requirements and site security-system design.
Applications
- Four-door commercial access control systems
- Office buildings, retail premises and warehouses
- Access and lift control installations
- Tecom ChallengerPlus access and intrusion systems
- Retrofit and replacement installations using compatible Tecom enclosures
- Large user-database access control applications
Standards & Compliance
- AS/NZS 2201.1:2007, Appendix C, referenced in the manufacturer's installation manual
- AS/NZS IEC 60839.11.1:2019 is the applicable Australian/New Zealand standard for electronic access control systems and components; verify project-specific conformity
- Manufacturer documentation references ACMA C-Tick regulatory compliance for Australia and New Zealand
Environmental Benefits
- PCB-only replacement format can reduce material use where an existing compatible enclosure is reused
- Remote firmware upgrading can extend service life and reduce premature hardware replacement
- Durable electronic control hardware supports longer-term system operation and reduced replacement waste
Warranty Information
5-year warranty for Tecom Challenger hardware, with replacement after the product has been tested and verified in accordance with the manufacturer's warranty policy.
Available Now
Available through Tecom and authorised Australian security-system distributors, subject to distributor stock and project requirements.
