Trade Discount 25%
Network Access Controller with Wiegand Board Only Tecom
Tecom network access controller with Wiegand supplied as a board only. Ideal for replacing or upgrading access controller boards.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: TS1067EB NAC, Tecom Wiegand Network Access Controller PCB, Tecom Access Controller Replacement Board
Technical Specifications
- Model: TS1067EB
- Format: PCB board only
- Wiegand Interfaces: 4 onboard ports
- Onboard Inputs: 16
- Onboard Relays: 5
- Ethernet: Onboard 10/100 Mbps
- Communications: 1 x ChallengerPlus RS-485 LAN and 2 x RS-485 reader or expander buses
- Default Capacity: 2,000 users and 4 doors or lifts
- Maximum Capacity: 250,000 users, 10,000 door groups and 50,000 history events
- Maximum Access-Control Capacity: 8 doors or lifts
- Credential Data Length: Up to 128 bits
- Input Expansion: Supports up to 2 x TS1021 input boards
- Power Input: 15 to 24.5 VAC, 100 VA
- Operating Temperature: 0 to 50 °C
- Storage Temperature: -20 to 80 °C
- Relative Humidity: Up to 93% non-condensing
- Regulatory Marking: ACMA RCM for Australia and New Zealand
- Dimensions (H x L x W): 255mm x 48mm x 218mm
- Weight: 0.6 kg
Key Features
- Board-only format for replacement or integration into a suitable enclosure
- Four onboard Wiegand reader interfaces
- Supports Tecom RS-485 readers and expanders, OSDP v2, Aperio and Salto devices
- Direct connection to supported management software
- Compatible with ChallengerPlus panels
- Dynamic Product Licensing supports expansion of users, doors and lifts without additional controller hardware
- Remote firmware upgrades through onboard Ethernet
- Scheduled lock, unlock and enable or disable actions
- Advanced diagnostics through CTPlus software
- Supports up to six readers per door in entry and exit configurations
- Switchable auxiliary 12 VDC power output
- Internal error analysis and fault-repair functions
Professional Installation Requirements
- Installation and commissioning should be performed by a qualified security or electrical technician. The board requires suitable enclosure mounting, low-voltage power, reader and door-lock wiring, earthing, configuration and system programming. Follow the manufacturer's installation instructions and applicable Australian wiring and access-control requirements.
Applications
- Replacement of legacy Tecom access controller boards
- Upgrading existing ChallengerPlus access-control installations
- Standalone networked door and lift access control
- Commercial buildings and multi-door premises
- Integration with Wiegand card, keypad and biometric readers
- Access-control systems requiring expansion to additional doors, users or lifts
Standards & Compliance
- AS/NZS IEC 60839.11.1:2019 — applicable requirements for electronic access-control systems and components; verify project-specific conformity
- AS/NZS IEC 60839.11.2:2019 — application guidance for electronic access-control system installation and operation
- AS/NZS 3000:2018 — electrical installation requirements applicable to associated wiring and power installation
Environmental Benefits
- Board-only supply can reduce the material and packaging associated with a complete controller enclosure when installed into existing infrastructure
- Supports system upgrades and component replacement without replacing the entire access-control installation, potentially reducing electronic waste
- Remote firmware updating can reduce service travel and unnecessary hardware replacement
- Designed for integration with existing Tecom and ChallengerPlus systems, extending the useful life of installed infrastructure
Warranty Information
Tecom hardware is covered by a 5-year warranty under the Aritech/Kidde Global Solutions Australia warranty policy, subject to the applicable terms, proof of purchase and warranty assessment.
Available Now
Available through Tecom/Aritech and authorised Australian security-system distributors.
