Trade Discount 25%
Network Access Controller with Wiegand Tecom
Tecom network access controller features Wiegand support. Ideal for commercial access control systems.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom Network Access Controller, TS1067 Network Access Controller, Wiegand Access Controller, NAC with Wiegand
Technical Specifications
- Model: TS1067E
- Network Interface: On-board 10/100 Mbps Ethernet
- Wiegand Support: Four Wiegand reader connections
- RS-485 Communications: One ChallengerPlus LAN bus and two local reader or expander buses
- On-board Inputs: 16
- On-board Relays: 5
- Access Capacity: Up to 8 doors or lifts
- User Capacity: 2,000 standard; up to 250,000 in IP Direct Mode
- Event Log: Up to 50,000 events in IP Direct Mode
- Input Voltage: 15 to 24.5 VAC; 19 VAC nominal
- Operating Temperature: 0 to 50 °C
- Storage Temperature: -20 to 80 °C
- Relative Humidity: Up to 93% non-condensing
- Installation Environment: Indoor, dry area
- Regulatory Marking: ACMA RCM for Australia and New Zealand
- Power Consumption: 226 mA without connected peripherals
- Dimensions (H x L x W): 580mm x 395mm x 112mm
- Weight: 12 kg
Key Features
- Four onboard Wiegand reader connections
- Direct Ethernet connection to Tecom management software
- Supports standalone access control or integration with ChallengerPlus systems
- Controls up to eight doors or lifts when licensed and configured
- Expandable inputs and relays through Tecom communication buses
- Supports anti-passback functionality
- Provides onboard battery testing, charging and resettable fuse protection
- Compatible with Tecom RS-485 readers, expanders and peripherals
- Designed for commercial access control and integrated intrusion applications
Professional Installation Requirements
- Installation, configuration and commissioning should be performed by a trained and qualified security technician. Hardware installation must follow the manufacturer's instructions, applicable Australian electrical requirements and the project access-control design. The unit requires low-voltage AC supply, battery connections, network cabling and reader wiring.
Applications
- Commercial building access control
- Office and multi-tenant building security
- Industrial and warehouse entry management
- Educational and institutional facilities
- Standalone networked door control
- ChallengerPlus access control and intrusion systems
- Lift and floor access management
Standards & Compliance
- AS/NZS IEC 60839.11.1:2019 — applicable requirements for electronic access control systems and components
- AS/NZS IEC 60839.11.2:2019 — applicable application guidance for electronic access control systems
- ACMA RCM regulatory marking for Australia and New Zealand
Environmental Benefits
- Modular inputs, relays and communication buses allow system expansion without replacing the controller
- Supports long service life through firmware updates, replaceable connected peripherals and configurable system capacity
- Enables centralised access management and scheduling, which may reduce unnecessary door, lift and security-system operation
- Electronic components and the printed circuit board should be recycled through an approved e-waste recycling stream at end of life
Warranty Information
Tecom hardware is listed with a 5-year warranty through Australian Tecom distribution channels; warranty conditions and eligibility should be confirmed with the authorised distributor. ([teracomsolutions.com.au](https://www.teracomsolutions.com.au/warranty))
Available Now
Available through Tecom/Aritech and authorised Australian security-system distributors. Confirm current stock, enclosure configuration and licensing requirements before ordering.
