Trade Discount 25%
Online UPS 10kVA 8kW 1Ph with 16x9Ah Batteries PowerSeries
PowerSeries GP online double conversion UPS features 10kVA 8kW, 1:1 single phase, 16x9Ah battery bank and generator compatibility. Ideal for critical loads.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: 10kVA 8kW Online UPS, Single-Phase Double-Conversion UPS, 10kVA UPS with Internal Battery Bank
Technical Specifications
- Rated Capacity: 10kVA / 8kW
- Topology: Online double conversion
- Input and Output: Single-phase, 1:1
- Battery Bank: 16 x 12V 9Ah valve-regulated lead-acid batteries
- Nominal Battery Voltage: 192V DC
- Nominal Output Voltage: 208/220/230/240V AC selectable
- Input Voltage Range: 110–286V AC
- Input Frequency Range: 40–70Hz, 50/60Hz auto-sensing
- Output Waveform: Pure sine wave
- Output Voltage Regulation: ±1%
- Transfer Time: 0ms from AC mode to battery mode
- Crest Factor: 3:1
- Generator Compatibility: Yes
- Communication: RS232/USB; optional relay and SNMP cards
- Operating Temperature: 0°C to 40°C
- Relative Humidity: 20–95% RH, non-condensing
- Noise Level: Up to 55dB at 1m
- Recharge Time: Approximately 6–8 hours to 90% capacity
- Dimensions (H x L x W): 337mm x 460mm x 191mm
- Weight: 69.5 kg
Key Features
- Online double-conversion topology for continuous power conditioning
- 8kW active power capacity for servers, networking, telecommunications and other critical loads
- Integrated 16-battery 9Ah VRLA battery bank
- Generator-compatible operation
- Selectable 208/220/230/240V output voltage
- Pure sine-wave output suitable for sensitive electronic equipment
- Zero transfer time between mains and battery operation
- ECO operating mode for reduced energy consumption
- Cold-start capability during mains failure
- LCD monitoring of voltage, frequency, load, battery status and estimated runtime
- Protection against overload, short circuit, over-temperature, battery overcharge and over-discharge
Professional Installation Requirements
- Installation, commissioning and battery servicing should be performed by a suitably qualified electrician or UPS technician. The unit requires hard-wired electrical connections, high-voltage DC battery handling and installation in accordance with AS/NZS 3000 and the manufacturer's instructions.
Applications
- Server rooms and data centres
- Telecommunications and network infrastructure
- Industrial control and automation systems
- Security, surveillance and access-control systems
- Medical, laboratory and other critical electronic loads
- Commercial facilities requiring generator-compatible backup power
Standards & Compliance
- AS 62040.1:2019 – Uninterruptible power systems safety requirements; product certification should be verified for the supplied unit
- AS/NZS 3000:2018 – Electrical installations, applicable to fixed electrical installation and connection
Environmental Benefits
- ECO mode can reduce operating losses when compatible with the connected load
- VRLA lead-acid batteries and associated metal components are recyclable through appropriate battery-recycling channels
- Continuous power conditioning and replaceable batteries can extend the service life of connected equipment and reduce premature electronic waste
Warranty Information
No POWERSERIES-specific warranty policy was located in the available manufacturer and distributor sources. Confirm the warranty period, battery coverage and service conditions with the authorised Australian distributor before purchase.
Available Now
Available through Aspen Pumps and authorised Australian electrical, IT-power and UPS distributors; supply is subject to distributor availability.
UPS Sizing Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
