SCHNAP Logo

Making Trade Life Easy!
Trade Discount 25%

Online UPS 6kVA 4.8kW 1Ph with 80x9Ah Batteries PowerSeries

BRAND: CABAC
SKU: GP806-9-80
$11,332.80 List price: $15,110.30
Free pick up (over 25 kg or over 1 meter)
Contact us for delivery cost
30 Days Return Electricians Unlock Trade Access
PowerSeries GP online double conversion UPS features 6kVA 4.8kW, 1:1 single phase, 80x9Ah battery bank and generator compatibility. Ideal for critical loads.

Alternatively Known As: PowerSeries GP Series UPS, PSS GP806 UPS, True Online UPS, Transformer-Based UPS, Single-Phase Online UPS

Technical Specifications
  • Model: GP806-9-80
  • Rated Capacity: 6kVA / 4.8kW
  • Topology: True online double conversion
  • Phase Configuration: Single-phase input and output, 1:1
  • Input Voltage: 176–264VAC
  • Nominal Output Voltage: 230VAC
  • Maximum Input Current: 30A
  • Maximum Output Current: 24A
  • Output Waveform: Pure sine wave using SPWM
  • Output Voltage Stability: ±1%
  • Output Frequency: 50/60Hz
  • Output Distortion: Less than 3% THD with linear loads
  • Power Factor: 0.8
  • Battery Bank: 80 x 12V 9Ah VRLA lead-acid batteries
  • Battery Configuration: 192VDC external battery bank in two BB-192T cabinets
  • Recharge Time: Approximately 8 hours to 90% capacity
  • Battery Management: Automatic charging and low-voltage shutdown
  • Transfer Time: 0 seconds during utility failure
  • Cooling: Forced-air cooling
  • Operating Temperature: 0–40°C
  • Operating Humidity: 20–90% RH, non-condensing
  • Noise Level: Less than 58dB at 1m
  • Communications: RS232 interface with monitoring software
  • Output Connection: Hard-wired terminal plate
  • Battery Cabinet: Two BB-192T external cabinets
  • Expected Service Life: Approximately 15 years under suitable operating conditions
  • Dimensions (H x L x W): 867mm x 650mm x 765mm
  • Weight: 320 kg
Key Features
  • True online double-conversion power protection
  • Galvanic isolation transformer for electrical separation between input and output
  • 6kVA capacity with 4.8kW active power rating
  • Single-phase 1:1 configuration for critical loads
  • Generator compatible for standby-power integration
  • Pure sine-wave output suitable for inductive and electronic loads
  • Zero transfer time during mains failure
  • Expandable battery autonomy using external battery banks
  • LCD status display for voltage, frequency, battery voltage, load and temperature
  • Automatic transfer to bypass during overload, fault or over-temperature conditions
  • Supplied with 80 x 12V 9Ah VRLA batteries in two external cabinets
  • Suitable for servers, telecommunications, industrial equipment and other critical loads
Professional Installation Requirements
  • Professional installation is required. The UPS must be hard-wired to the switchboard by a licensed electrician, with correctly sized input and output protection, earthing, RCD protection where applicable, and battery cabling installed by suitably qualified personnel in accordance with AS/NZS 3000 and the manufacturer's instructions.
Applications
  • Server rooms and data centres
  • Telecommunications and network infrastructure
  • Industrial control and automation equipment
  • Medical and laboratory equipment
  • Security, surveillance and access-control systems
  • Point-of-sale and business-critical systems
  • Inductive loads including motors, air-conditioning equipment and copiers
  • Critical electrical loads requiring extended battery autonomy
Standards & Compliance
  • AS 62040 series for uninterruptible power systems
  • AS/NZS 3000 for hard-wired electrical installation requirements
  • RCM/EESS compliance should be confirmed for the supplied Australian configuration
Environmental Benefits
  • VRLA lead-acid batteries can be recovered through established battery recycling streams when replaced
  • Long-life transformer-based construction can reduce replacement frequency and associated equipment waste
  • Double-conversion regulation can support stable operation of connected equipment and reduce disturbance-related failures
  • Replaceable external battery cabinets allow battery servicing without replacing the complete UPS system
Warranty Information

PSS standard return-to-base warranty: 2 years from the purchase date, subject to proof of purchase and the manufacturer's warranty conditions. Extended warranty options may be available for eligible UPS units with required commissioning and preventative maintenance.

Available Now

Available through PowerSeries/PSS and authorised Australian distributors; confirm current lead time and configuration availability before ordering.

UPS Sizing Calculator




This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.

Related Products