Trade Discount 25%
Park-60 DALI LED Batten 7.5/15W Wire Guard Tri-Colour White Domus
Domus Park-60 DALI LED batten with wire guard, 600mm, 7.5/15W selectable, white body, tri-colour.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: PARK-60-WG-DALI, Domus Park 60 DALI Batten, DALI LED Batten, 600mm LED Wire Guard Batten
Technical Specifications
- Model: PARK-60-WG-DALI
- Variant ID: 67436
- Wattage: 7.5W/15W selectable
- Dimming: DALI
- Colour Temperature: 3000K/4000K/5000K switchable
- Input Voltage: 240V AC
- Lumen Efficiency: 130 lm/W high-output dedicated LED
- Approximate Lumen Output: Up to 1,950 lm at 15W, depending on selected CCT
- Beam Angle: 120°
- Colour Rendering Index: CRI ≥80
- Ingress Protection: IP20
- Construction: White powder-coated pressed sheet metal body with wire guard
- Light Source: Dedicated LED with replaceable LED module
- Cable Entry: 20mm knockouts for conduit or cable glands
- Dimensions (H x L x W): 82mm x 620mm x 109mm
- Weight: 1.1 kg
Key Features
- DALI-controllable LED batten for managed lighting installations
- Selectable 7.5W or 15W output via the driver switch
- Tri-colour CCT selection between 3000K warm white, 4000K neutral white and 5000K white
- 600mm nominal format with 620mm overall length
- Wire guard provides mechanical protection for the light source
- Designed as a direct replacement for T8 and T5 wide-body fluorescent battens
- Suitable for laundries, garages, storerooms and underground carparks
- Australian-designed product with integrated LED driver
Professional Installation Requirements
- Installation must be performed by a licensed electrician. Isolate the 240V supply before installation and connect the DALI control wiring in accordance with the manufacturer's installation instructions and applicable wiring requirements.
Applications
- Residential laundries and garages
- Storerooms and utility areas
- Commercial carparks
- Industrial and commercial service areas
- DALI-controlled lighting systems
- Replacement of T8 and T5 wide-body fluorescent battens
Standards & Compliance
- AS/NZS 60598.1:2017 - applicable general safety and construction requirements for luminaires
- Manufacturer datasheet states approval to AS 2293.3:2005 with Amendments 1 and 2; verify project-specific applicability where emergency-lighting compliance is required
Environmental Benefits
- LED technology provides lower energy consumption than traditional fluorescent battens at comparable light levels
- Selectable lower-power operation can reduce energy use where full output is not required
- Replaceable LED module can extend service life and reduce whole-fitting waste
- Steel body and wire guard are recyclable at end of service life
- Long-life solid-state lighting reduces lamp replacement frequency and maintenance waste
Warranty Information
Five-year replacement warranty stated on the manufacturer datasheet. Domus Lighting's current warranty policy lists LED battens purchased after 1 July 2024 as covered for 5 years in residential applications and 3 years in commercial applications. Warranty eligibility requires purchase through an authorised distributor, installation by a licensed electrician and installation in accordance with Domus guidelines.
Available Now
Available through Domus Lighting and authorised Australian electrical wholesalers and lighting distributors.
