Plex-COB-20-IP67 LED Strip 24V IP67 CRI90 5000K 20m Roll Domus
Domus Plex-COB-20-IP67 LED Strip, 24V DC, IP67, CRI90, 640 LED/m, 5000K, 20m roll. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: Domus PLEX COB IP67 LED Strip, COB LED Tape Light, Waterproof 24V LED Strip, Dotless LED Strip
- Input Voltage: 24V DC
- Power Consumption: 20W per metre
- Colour Temperature: 5000K
- Lumen Output: 1700lm per metre
- Colour Rendering Index: CRI ≥90
- LED Type: COB, 640 LEDs per metre
- Beam Angle: 180°
- Ingress Protection: IP67
- Dimming: Yes, with compatible LED driver and dimmer
- Lifespan: 50,000 hours
- Wiring: Parallel
- Cutting Increment: 25mm
- Maximum Continuous Run: 3m with one-end driver feed; 6m with two-end driver feed
- Required Driver: 24V DC constant-voltage LED driver
- Working Temperature: -20°C to 50°C
- Storage Temperature: -30°C to 80°C
- Variant: 24067
- Roll Length: 20m
- Dimensions (H x L x W): 4.5mm x 20000mm x 12mm
- Weight: 2 kg
- COB technology provides a smooth, true dotless appearance
- IP67 silicon-coated construction for waterproof installations
- High CRI90 light quality for accurate colour rendering
- 5000K white colour temperature
- 180° beam angle for broad linear illumination
- Dimmable with a suitable 24V LED driver and dimmer
- 25mm cutting increments for flexible installation
- Weldless joint construction supports continuity and reliability
- Must be installed on an aluminium heat sink to manage heat and preserve warranty coverage
- Suitable for Domus PLEX-COB connectors and accessories
- Installation should be completed by a licensed electrician. Use a compatible 24V DC constant-voltage LED driver, install the strip on an aluminium heat sink, and ensure all IP67 connections, end caps and cable entries are correctly sealed. Follow AS/NZS 3000 and the manufacturer's installation instructions.
- Kitchen and bathroom feature lighting
- Laundry and wet-area accent lighting
- Bar and restaurant linear lighting
- Commercial display and architectural highlighting
- Pelmet, cabinet and joinery lighting
- Indoor or protected outdoor linear lighting applications
- AS/NZS 3000: applicable wiring and installation requirements for low-voltage electrical installations; product-specific certification is not stated by the manufacturer
- AS/NZS 60598.1 and applicable lighting-part requirements may apply to the complete assembled lighting system; manufacturer compliance for this strip alone is not stated
- LED technology provides efficient directional lighting compared with conventional light sources
- 50,000-hour rated lifespan can reduce replacement frequency and associated waste
- 24V operation and parallel wiring support efficient low-voltage lighting system design
- Aluminium heat-sink installation assists thermal management and can extend service life
- LED lighting contains no mercury-based fluorescent lamp source
Domus warranty statement: 3-year replacement warranty for residential applications and 12-month replacement warranty for commercial applications. COB LED strips receive a total 5-year residential replacement warranty, or 2-year commercial replacement warranty, when used with Domus drivers. Warranty eligibility requires licensed electrician installation and compliance with installation instructions, including aluminium heat-sink installation.
Available through Domus Lighting and authorised Australian electrical wholesalers and lighting retailers.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
