Plex-COB-5 LED Strip 24V IP54 CRI90 4000K 20m Roll Domus
Domus Plex-COB-5 LED Strip, 24V DC, IP54, CRI90, 640 LED/m, 4000K, 20m roll. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: Plex COB-5 LED Tape, COB LED Strip Light, Dotless LED Strip, 24V LED Tape, High-CRI LED Strip
- Input Voltage: 24V DC
- Power Consumption: 5W per metre
- Supply Length: 20m roll
- Colour Temperature: 4000K neutral white
- Lumen Output: 500 lm per metre
- LED Type: COB, 640 LEDs per metre
- Colour Rendering Index: CRI ≥90
- IP Rating: IP54 for indoor use and suitable indoor wet areas
- Beam Angle: 180°
- Dimming: Yes, with compatible 24V LED driver and dimmer
- Rated Life: 50,000 hours
- Wiring: Parallel
- Cutting Increment: 25mm
- Maximum Continuous Run: 5m with one-end feed or 10m with two-end feed
- Operating Temperature: -20°C to 50°C
- Storage Temperature: -30°C to 80°C
- Driver Requirement: 24V DC constant-voltage LED driver
- Heat Management: Must be installed on an aluminium heat sink or LED profile
- Dimensions (H x L x W): 4.5mm x 20000mm x 12mm
- Weight: 1.2 kg
- True dotless COB illumination with 640 LEDs per metre
- High colour rendering with CRI ≥90
- 4000K neutral white light suitable for residential and commercial interiors
- IP54 construction for indoor use, including suitable indoor wet-area applications
- Flexible 20m supply roll with 25mm cutting increments
- Dimmable with a suitable constant-voltage driver and compatible dimming control
- Long 50,000-hour rated life
- Aluminium heat sink installation helps manage operating temperature and maintain warranty conditions
- Installation should be performed by a licensed electrician. Use a compatible 24V DC constant-voltage LED driver, size the installation within the stated maximum run lengths, and install the strip on a suitable aluminium heat sink or profile. Any mains-voltage driver connection must comply with applicable Australian wiring requirements.
- Cove and concealed architectural lighting
- Kitchen, bathroom and laundry accent lighting
- Retail, hospitality and restaurant linear lighting
- Display cabinets, shelving and joinery illumination
- Residential and commercial indoor highlighting applications
- Applicable luminaire safety framework: AS/NZS 60598.1:2025, Luminaires, Part 1: General requirements and tests
- Installation wiring should comply with AS/NZS 3000 where the 24V driver is connected to the electrical installation
- The available product data does not state a specific product certification or declaration of compliance to these standards
- Uses 5W per metre for relatively low electrical consumption compared with many higher-output strip-lighting options
- 50,000-hour rated life can reduce replacement frequency and associated material waste
- 24V DC operation supports efficient low-voltage lighting system design
- Aluminium heat-sink installation can assist thermal management and extend service life
- LED lighting avoids mercury-containing fluorescent lamp technology
Domus Lighting's 9 January 2026 warranty statement specifies a COB LED Strip warranty of 3 years replacement for residential applications, extending to a total of 5 years when used with Domus drivers. Commercial warranty is 12 months replacement, extending to a total of 2 years when used with Domus drivers. Warranty eligibility requires licensed-electrician installation and adherence to Domus installation guidelines, including aluminium heat-sink installation.
Available through Domus Lighting and authorised Australian electrical and lighting distributors.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
