Plex-SMD LED Strip 9W/m 24V IP54 CRI90 3000K 50m Roll Domus
Domus Plex-SMD LED Strip, 9W/m, 24V DC, IP54, CRI90, 120 LED/m, 3000K, 50m roll. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: PLEX-SMD-9-50M, Domus PLEX SMD LED Strip, 24 V LED Tape, Warm White LED Strip
- Item Number: 24195
- Roll Length: 50 metres
- Light Source: SMD LED
- Power Consumption: 9 W/m
- Input Voltage: 24 V DC
- Lumen Output: 765 lm/m at 3000K
- Colour Temperature: 3000K warm white
- Colour Rendering Index: ≥90
- LED Density: 120 LEDs/m
- Beam Angle: 120°
- Wiring: Parallel
- IP Rating: IP54
- Cutting Increment: 25 mm
- Maximum Continuous Run: 20 m with one-end feed; 40 m with feeds at both ends
- Dimming: Yes, with suitable dimmers
- Operating Temperature: -20°C to 50°C
- Required Driver: 24 V DC constant-voltage LED driver
- Installation Requirement: Install on an aluminium heat sink
- Dimensions (H x L x W): 5.4mm x 50000mm x 10mm
- Weight: 2.5 kg
- High-colour-rendering CRI90 light output
- Efficient 9 W/m SMD LED design
- 24 V DC operation helps reduce resistive heat and voltage drop
- 120 LEDs per metre for consistent illumination
- IP54 protection for indoor and damp-area applications
- Dimmable with compatible control equipment
- 25 mm cutting increments
- Weldless joint construction for improved continuity
- Suitable for kitchens, bathrooms, laundries, bars, restaurants and feature lighting
- Designed for long runs up to 20 m from one end or 40 m with feeds at both ends
- Installation should be completed by a licensed electrician or suitably qualified lighting professional. Use a compatible 24 V DC constant-voltage LED driver, install the strip on an aluminium heat sink, and comply with applicable Australian electrical installation requirements. The 50 m roll must be divided into suitable feed lengths rather than operated as one continuous 50 m run.
- Architectural feature lighting
- Kitchen and cabinet lighting
- Bathroom and laundry lighting in suitable IP54 applications
- Bar and restaurant lighting
- Under-eave and sheltered outdoor highlighting
- Commercial linear lighting installations
- Display, joinery and cove lighting
- AS/NZS 60598.1: General requirements and tests for luminaires, applicable to the completed lighting assembly where relevant
- AS/NZS 60598.2.1: Particular requirements for fixed general-purpose luminaires, applicable to the completed low-voltage lighting assembly where relevant
- AS/NZS 61347.2.13: Particular requirements for LED controlgear, applicable to the required 24 V DC LED driver
- High efficacy of approximately 100–110 lm/W can reduce energy consumption compared with lower-efficacy lighting for an equivalent light output
- 24 V DC operation and long-run design can reduce resistive losses when correctly installed and fed
- LED technology has a long service life compared with many conventional light sources, helping reduce replacement waste
- The flexible strip and aluminium heat-sink installation support serviceable linear lighting systems rather than complete fitting replacement
Domus Lighting warranty: 3-year replacement warranty for residential LED strips and 12-month replacement warranty for commercial LED strips, subject to the manufacturer's conditions. Warranty eligibility requires installation by a licensed electrician, adherence to installation guidelines and installation on an aluminium heat sink. Warranty does not cover removal or re-installation costs unless otherwise stated.
Available through Domus Lighting and authorised Australian electrical wholesalers; stock and lead times are subject to distributor confirmation.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
