Plex-SMD LED Strip 9W/m 24V IP67 CRI90 3000K 50m Roll Domus
Domus Plex-SMD LED Strip, 9W/m, 24V DC, IP67, CRI90, 120 LED/m, 3000K, 50m roll. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: PLEX-SMD-9-IP67 LED Strip, Domus 24V LED Tape, IP67 SMD LED Strip, Warm White LED Strip
- Light Source: SMD LED
- Power Consumption: 9W per metre
- Input Voltage: 24V DC
- Colour Temperature: 3000K warm white
- Colour Rendering Index: CRI90 or higher
- LED Density: 120 LEDs per metre
- Ingress Protection: IP67
- Beam Angle: 120°
- Luminous Efficacy: 100–110 lm/W
- Luminous Output: Approximately 900–990 lm/m based on published efficacy
- Cutting Increment: 25mm
- Maximum Continuous Run: 20m with single-end feed and driver; up to 40m with feeds at both ends
- Dimming: Compatible with suitable 24V DC dimming equipment
- Driver Requirement: 24V DC constant-voltage LED driver, not included
- Heat Management: Install on an aluminium heat sink
- Roll Length: 50m
- Dimensions (H x L x W): 5.4mm x 50000mm x 13mm
- Weight: 5.0 kg
- Warm white 3000K light colour for residential and hospitality applications
- High CRI90 colour rendering
- IP67 construction for protection against dust and temporary water immersion
- Low-voltage 24V DC operation
- 120 SMD LEDs per metre for even linear illumination
- Designed for extended run lengths with reduced resistive heat
- Cuttable at 25mm intervals
- Dimmable with compatible control equipment
- Suitable for kitchens, bathrooms, laundries, bars, restaurants and indoor feature lighting
- Installation should be performed by a licensed electrician in accordance with the manufacturer's instructions and applicable electrical requirements. Use a correctly rated 24V DC constant-voltage driver, provide aluminium heat sinking along the strip, observe the maximum run length and ensure all IP67 connections remain suitably sealed. Domus warranty conditions require licensed-electrician installation.
- Architectural feature lighting
- Kitchen, bathroom and laundry accent lighting
- Bar, restaurant and hospitality interiors
- Joinery, shelving and cabinet illumination
- Commercial display and retail highlighting
- Cove, pelmet and indirect lighting installations
- AS/NZS 60598.1:2025 may apply to the completed luminaire or lighting assembly; Domus does not publish a product-specific compliance declaration for this LED strip.
- AS/NZS 3000:2018 with applicable amendments applies to the associated electrical installation and wiring; product-specific compliance should be confirmed with the installer or supplier.
- LED technology provides high luminous efficacy at approximately 100–110 lm/W, supporting lower energy use for equivalent decorative lighting output.
- 24V DC operation and extended run capability can reduce resistive losses compared with shorter, higher-current strip runs.
- The strip is designed for aluminium heat-sink installation, supporting heat management and potentially extending service life when correctly installed.
- Long 50m roll format can reduce packaging and joint waste compared with supplying multiple shorter rolls.
Domus warranty policy lists LED strips under a 3-year replacement warranty for residential applications and a 12-month replacement warranty for commercial applications, subject to proof of purchase, licensed-electrician installation and compliance with installation guidelines. Installation on an aluminium heat sink is required to preserve warranty eligibility. ([domuslighting.com.au](https://www.domuslighting.com.au/wp-content/uploads/2026/01/Warranty-Statement-Revised-09-01-2026.pdf))
Available through Domus Lighting and authorised Australian electrical wholesalers, lighting retailers and distributors. Confirm current availability and whether the 50m roll is made to order.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
