Plex-SMD LED Strip 9W/m 24V IP67 CRI90 5000K 50m Roll Domus
Domus Plex-SMD LED Strip, 9W/m, 24V DC, IP67, CRI90, 120 LED/m, 5000K, 50m roll. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: Plex SMD-9 IP67 LED Strip, 24V LED Tape, Waterproof LED Strip Lighting, Domus SKU 24201
- Product Code: 24201
- Light Source: SMD LED
- Power Consumption: 9W per metre
- Input Voltage: 24V DC
- Colour Temperature: 5000K
- Colour Rendering Index: CRI90 or higher
- LED Density: 120 LEDs per metre
- Beam Angle: 120 degrees
- Luminous Efficacy: 100-110 lm/W
- Light Output: Approximately 900-990 lm/m based on stated efficacy
- Ingress Protection: IP67
- Cutting Increment: 25mm
- Maximum Continuous Run: 20m with single-end feed and driver; up to 40m with feeds at both ends
- Wiring: Parallel
- Dimming: Yes, with suitable dimmer
- Required Driver: 24V DC constant-voltage LED driver
- Heat Management: Must be installed on an aluminium heat sink
- Dimensions (H x L x W): 5.4mm x 50000mm x 13mm
- Weight: 3.5 kg
- High colour rendering performance with CRI90 specification
- IP67 protection for waterproof strip-lighting applications
- 24V DC operation supports longer runs with reduced resistive heat
- 120 SMD LEDs per metre for consistent linear illumination
- Dimmable with compatible control equipment
- Can be cut at 25mm intervals
- Suitable for kitchens, bathrooms, laundries, bars, restaurants and indoor highlighting
- Longer weldless joint sections help reduce continuity failure points
- Installation requires a correctly sized 24V DC constant-voltage LED driver and aluminium heat sink. The mains-voltage driver connection should be completed by a licensed electrician, with the installation carried out in accordance with applicable Australian electrical requirements. Seal and protect all cut ends and connections to maintain the intended IP rating.
- Kitchen and bathroom feature lighting
- Laundry and wet-area highlighting
- Bar and restaurant ambient lighting
- Commercial interior highlighting
- Display, joinery and cabinet lighting
- Architectural coves and concealed linear lighting
- Decorative lighting in areas requiring IP67 protection
- AS/NZS 3000:2018 Wiring Rules — relevant to the electrical installation, driver connection and low-voltage wiring
- AS/NZS 60598.1 — general safety requirements potentially applicable to the completed LED lighting assembly; verify the complete system and driver documentation
- LED technology provides lower energy consumption than equivalent conventional lighting for similar illumination levels
- 24V operation and stated 100-110 lm/W efficacy support efficient lighting system design
- Long service life and IP67 protection can reduce replacement frequency and associated material waste
- The strip is a replaceable component, allowing sections of a lighting installation to be renewed without replacing the entire fitting
Domus Lighting warranty statement dated 9 January 2026: LED strips have a 3-year replacement warranty for residential applications and a 12-month replacement warranty for commercial applications. Warranty eligibility requires installation by a licensed electrician and compliance with Domus installation guidelines. Domus specifies installation on an aluminium heat sink; failure to do so may void the warranty.
Available through Domus Lighting and authorised Australian electrical wholesalers and lighting distributors.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
