Plex-Ultra COB LED Strip 10W/m 24V IP67 3000K Per Metre Domus
Domus Plex-Ultra COB LED Strip, 10W/m, 24V DC, IP67, CRI90, 560 LED/m, 3000K, sold per metre. Requires 24V DC LED driver.
Sign in
Please login to continue to your account.
Alternatively Known As: Plex-Ultra IP67 LED Strip, COB LED Strip Light, 24V LED Tape, Dotless LED Strip
- Power: 10W per metre
- Input Voltage: 24V DC
- Colour Temperature: 3000K warm white
- Colour Rendering Index: CRI ≥90
- Light Source: COB LED
- LED Density: 560 LEDs per metre
- Lumen Output: Approximately 770 lm/m at 3000K
- IP Rating: IP67 with silicone coating
- Beam Angle: 180°
- Cutting Increment: 25mm
- Maximum Run: 13m with single-end feed; 26m with both-end feed
- Dimming: Yes, with compatible dimmer and driver
- Wiring: Parallel
- Required Driver: 24V DC constant-voltage LED driver
- Installation Requirement: Install on an aluminium heat sink to manage heat and maintain warranty coverage
- Dimensions (H x L x W): 2.8mm x 1000mm x 10mm
- Weight: 0.15 kg
- True dotless COB illumination
- IP67 protection for waterproof lighting installations
- High CRI90 light output for improved colour rendering
- 24V DC operation supports longer run lengths with reduced resistive heat
- 560 LEDs per metre for smooth, continuous illumination
- 25mm cutting increments for flexible sizing
- Dimmable with suitable 24V DC equipment
- Suitable for indoor highlighting and wet-area applications when installed correctly
- Installation should be performed by a licensed electrician. Use a compatible 24V DC constant-voltage LED driver, suitable dimming equipment where required, and install the strip on an aluminium heat sink in accordance with the manufacturer's instructions and applicable electrical installation requirements.
- Kitchen and cabinetry lighting
- Bathroom and laundry highlighting
- Bar and restaurant feature lighting
- Residential and commercial accent lighting
- Indoor linear illumination
- Waterproof highlighting installations within the product's IP67 limitations
- AS/NZS 3000:2018 – electrical installation requirements for low-voltage lighting systems
- AS/NZS 61347.2.13 – applicable safety requirements for the required LED driver or controlgear
- LED technology provides efficient illumination compared with many traditional light sources
- Longer continuous runs can reduce the number of joins, connectors and associated installation materials
- Low-voltage 24V DC operation supports efficient system design
- Aluminium heat-sink installation assists thermal management and may extend product service life, reducing replacement waste
Domus COB LED Strips have a 3-year replacement warranty for residential applications, extending to 5 years when used with Domus drivers. Commercial applications receive a 12-month replacement warranty, extending to 2 years when used with Domus drivers. Warranty eligibility requires licensed installation and compliance with Domus installation instructions.
Available through Domus Lighting and authorised Australian electrical and lighting distributors.
Lighting Requirement Calculator
This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.
