Trade Discount 25%
Proximity Access Control Reader 26-bit Wiegand Waterproof Ness
Ness proximity access control reader features 26-bit Wiegand output and a waterproof design. Ideal for access control installs.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Ness UltraProx Reader, Ness 101-014 Proximity Reader, Waterproof Wiegand Card Reader
Technical Specifications
- Reader Format: 125 kHz proximity
- Data Output: 26-bit Wiegand
- Operating Voltage: 12–16 V DC regulated
- Current Draw: 50 mA
- Typical Read Range: Up to 100 mm
- Card Compatibility: EM-format proximity cards and key fobs
- Card Read Time: Less than 50 ms
- Housing: Fully sealed mullion-mount housing
- Ingress Protection: IP65
- Status Indication: User-configurable LED and piezo beeper
- Controller Compatibility: Ness X Series and most 26-bit Wiegand access controllers
- Recommended Cabling: Twisted three-pair shielded cable
- Recommended Repeater Distance: Wiegand repeater for cable runs over 75 m
- Dimensions (H x L x W): 82mm x 24mm x 48mm
- Weight: 0.1 kg
Key Features
- 26-bit Wiegand output for connection to a separate access controller
- Waterproof, fully sealed housing suitable for indoor and outdoor use
- Compact mullion-mount design for narrow door-frame installations
- Compatible with Ness D8X, D16X and X Series control panels
- Supports standard EM-format proximity cards and key fobs
- User-configurable LED and audible buzzer
- Addressable option available for compatible Ness controllers
Professional Installation Requirements
- Installation should be completed by a suitably qualified security or electrical installer. Connect only to a regulated 12–16 V DC supply and install cabling, earthing and controller connections in accordance with the access-control system manufacturer’s instructions and applicable electrical requirements.
Applications
- Commercial and residential door access control
- Outdoor pedestrian entry points
- Security doors and restricted areas
- Ness X Series access-control installations
- Third-party access controllers using 26-bit Wiegand input
Standards & Compliance
- Relevant access-control installation guidance: AS/NZS IEC 60839.11.2:2019
- Manufacturer literature identifies C-tick compliance; verify current regulatory marking for the supplied unit before installation
Environmental Benefits
- Low operating current of approximately 50 mA supports efficient low-voltage access-control systems
- Sealed IP65 housing helps protect electronics from moisture and extend service life
- Durable construction can reduce replacement frequency and electronic waste
Warranty Information
Ness manufactured or supplied products are covered by Ness Corporation’s general 3-year warranty from the date of purchase, unless otherwise specified. Warranty claims require return to a Ness branch and are subject to the manufacturer’s terms and the Australian Consumer Law.
Available Now
Available through Ness Corporation and authorised Australian security and access-control distributors.
