Trade Discount 25%
Rain Mains Controller 3 Phase 2 Pump Vasco Matelec
Matelec Rain Mains Controller features 3 phase Vasco operation and twin pump control. Ideal for automatic pump control and water supply management.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Matelec Rain/Mains Pump Controller, Dual Pump Rainwater Changeover Controller, Vasco VSD Rainwater Controller, FPC-12744
Technical Specifications
- Model: FPC-12744
- Pump Capacity: Dual pump control
- Supply: Three phase, 400 Vac
- VSD Compatibility: Motor-mounted variable speed drives, including Vasco systems
- Enclosure Rating: IP56
- Enclosure Material: Powder-coated mild steel with inner door and removable gland plate
- Control Inputs: 12 Vdc float switch input and up to two 12 Vdc VSD fault inputs
- Control Outputs: Up to two volt-free VSD enable outputs
- Solenoid Output: 12 Vdc pulse-latching solenoid valve output
- Included Valve: 25 mm female/female 12 Vdc pulse-latching solenoid valve
- Protection: Padlockable mains isolator and circuit-breaker protection for control circuitry and individual pumps
- Dimensions (H x L x W): 400mm x 300mm x 200mm
- Weight: 10 kg
Key Features
- Prioritises stored rainwater before switching to mains water
- Automatically changes to mains water when the rainwater tank is depleted, a VSD fault occurs or power fails
- Controls and enables up to two motor-mounted VSD pump systems
- Provides individual pump isolation through circuit-breaker protection
- Rain/mains keypad with water-source and system-fault indicators
- System test and reset function for pump and valve operation
- Pulse-latching solenoid valve minimises continuous valve energisation
- DIN rail-mounted terminal connections
- IP56 enclosure suitable for protected indoor or outdoor control-panel installations
Professional Installation Requirements
- Installation and commissioning should be performed by a licensed electrician and suitably qualified pump or irrigation professional. The controller operates from a 400 Vac three-phase supply and must be installed, wired and tested in accordance with manufacturer instructions and applicable Australian electrical requirements.
Applications
- Rainwater harvesting systems with mains-water backup
- Domestic, commercial and industrial pressure-boosting systems
- Dual-pump water supply systems using Vasco or compatible motor-mounted VSDs
- Automatic changeover between rainwater tanks and mains water
- Irrigation and non-potable water supply systems
Standards & Compliance
- AS/NZS 3000: Electrical installations, applicable to wiring and installation
- AS/NZS 61439.1 and AS/NZS 61439.2: Relevant low-voltage switchgear and controlgear assembly standards
- AS/NZS 3820: Essential safety requirements for relevant electrical equipment where applicable
Environmental Benefits
- Prioritises rainwater use, reducing reliance on mains water supplies
- Automatic changeover helps maximise the use of harvested rainwater while maintaining water availability
- VSD enable control can support efficient pump operation and reduced energy use compared with fixed-speed operation
- Powder-coated steel enclosure is durable and suitable for recycling at end of service life
- Extended service life and integrated protection can reduce premature component replacement and waste
Warranty Information
Matelec Australia standard warranty is a minimum of 12 months from the date of dispatch, subject to correct installation, use and servicing in Australia. Warranty claims require inspection and evidence of installation by a suitably qualified person.
Available Now
Available through Matelec Australia and authorised Australian distributors, subject to configured pump and overload requirements.
