Trade Discount 25%
Single Door Access Module 13.8VDC Wiegand Reader Compatible Ness
Ness single door access module features 13.8VDC operation, Wiegand reader compatibility and relay output. Ideal for access control installs.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Ness 101-246, M1 Single Door Access Module, M1KAM Access Interface
Technical Specifications
- Manufacturer Part Number: 101-246
- System Compatibility: Ness M1 and M1EZ8 control panels
- Operating Voltage: 13.8 VDC
- Current Draw: Less than 30 mA minimum activity; 44 mA fully active
- Reader Interface: 26-bit Wiegand
- Relay Output: Heavy-duty Form C dry contacts for door strike control
- Additional Outputs: 12 VDC switched-negative outputs for door-held, ready-to-arm and armed indications
- Additional Inputs: Supervised request-to-exit and door-status inputs with 2.2 kOhm end-of-line resistors
- Connections: 16-position unpluggable screw terminals
- Bus Interface: RS-485 four-wire keypad data bus
- Maximum System Capacity: Up to 16 access modules and keypads combined, subject to panel limitations
- Enclosure: Universal surface-mount plastic housing with raceway knockouts
- Dimensions (H x L x W): 54mm x 162mm x 108mm
- Weight: 0.45 kg
Key Features
- Controls access to one door through a Ness M1 or M1EZ8 panel
- Accepts compatible 26-bit Wiegand card swipe and proximity readers
- Provides a Form C relay output for switching compatible door-lock devices
- Includes supervised request-to-exit and door-status inputs
- Provides door-held, system-ready and system-armed status outputs
- Installs on the M1 keypad data bus in place of a traditional keypad
- Hardware watchdog circuit for module supervision
Professional Installation Requirements
- Installation should be carried out by a suitably qualified security installer or electrical trade professional. Configure and wire the module, reader, door sensor, request-to-exit device and locking hardware in accordance with the Ness installation manual and applicable Australian wiring requirements.
Applications
- Single-door access control in residential premises
- Commercial office and building entry systems
- Institutional and educational access control
- Integration of Wiegand proximity or card readers with Ness M1 systems
- Door strike or compatible lock control
Standards & Compliance
- Applicable system standard: AS/NZS IEC 60839.11.1:2019, Alarm and electronic security systems — Electronic access control systems — System and components requirements. Product-specific conformity is not stated by the manufacturer.
Environmental Benefits
- Low operating current, typically below 44 mA, helps minimise energy consumption during continuous operation
- Durable surface-mount enclosure and replaceable system-level design can help extend service life and reduce replacement waste
- Supports controlled access systems that can reduce reliance on mechanical keys and associated replacement materials
Warranty Information
Ness manufactured or supplied products are covered by a 3-year warranty from the date of purchase, subject to Ness warranty terms and exclusions.
Available Now
Available through Ness and authorised Australian security distributors.
