Trade Discount 25%
Transducer Hydrostatic Potable 0-1m Ceramic 24m Lead 4-20mA Matelec
Matelec hydrostatic transducer features 0-1m potable range, ceramic diaphragm and 4-20mA output on 24m lead. Ideal for tank level sensing.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Potable Water Level Sensor, Hydrostatic Tank Level Transmitter, Submersible 4–20 mA Level Transducer
Technical Specifications
- Model: FPC-12573-24-SE
- Measurement Range: 0–1 m water depth
- Pressure Range: Approximately 0–0.1 bar
- Output Signal: 4–20 mA DC
- Supply Voltage: 12–30 V DC
- Accuracy: ±0.5% full scale
- Response Time: 10 ms
- Diaphragm: Ceramic
- Housing Material: 316L stainless steel
- Protection Rating: IP68
- Electrical Connection: 3-wire connection with breather tube
- Cable Length: 24 m
- Cable Diameter: 7.5 mm outside diameter
- Cable Material: PUR polyurethane
- Operating Temperature: −10°C to 70°C
- Overload Pressure: 1.5 times full scale
- Operating Life: Greater than 100 million pressure cycles
- Dimensions (H x L x W): 100mm x 28mm x 28mm
- Weight: 1.2 kg
Key Features
- Designed for potable, raw, ground and rainwater level measurement
- Suitable for continuous tank level monitoring
- Ceramic diaphragm for hydrostatic pressure measurement
- 316L stainless steel housing for corrosion resistance
- IP68-rated submersible sensor
- 4–20 mA output for connection to controllers, PLCs and building management systems
- 24 m PUR cable with integral breather tube for vented gauge-pressure measurement
- Excellent repeatability and long-term stability
- Not suitable for sewage or wastewater applications
Professional Installation Requirements
- Installation and electrical connection should be completed by a suitably qualified technician. Use a compatible 12–30 V DC loop supply, prevent the breather tube from being kinked or obstructed, and secure the transducer to avoid movement caused by turbulence.
Applications
- Potable water storage tanks
- Rainwater tank level monitoring
- Groundwater and bore level measurement
- Open water level monitoring
- Pump control and tank automation systems
- PLC, telemetry and building management system level inputs
Standards & Compliance
- AS/NZS 4020:2018 is the relevant Australian/New Zealand standard for products used in contact with drinking water; specific MATelec compliance certification was not stated in the available product documentation.
Environmental Benefits
- 316L stainless steel housing is durable and recyclable at end of service life
- Long operating life can reduce replacement frequency and product waste
- Supports automated tank and pump control, helping reduce water wastage
- Low-voltage 4–20 mA instrumentation signal supports efficient monitoring and control systems
Warranty Information
MATelec Australia provides a minimum 12-month warranty for hardware products from the date of dispatch, subject to its warranty terms, correct installation and use, and inspection of any claimed product.
Available Now
Available through MATelec Australia and authorised Australian distributors, subject to distributor stock.
