Trade Discount 25%
Vandal Proof Card Reader with Keypad Hikvision
Hikvision card reader features a vandal proof design and keypad. Ideal for access control installs.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Hikvision Pro 1104 Series Card Reader, MIFARE Access Reader with PIN Keypad, Vandal-Proof Access Control Reader
Technical Specifications
- Card Technology: MIFARE 1, 13.56 MHz
- Reading Range: Up to 50 mm
- Keypad: 12 keys, including 0–9, * and #
- Communication: RS-485 and Wiegand W26/W34
- Power Supply: 12 VDC
- Working Current: ≤500 mA
- Power Consumption: ≤2 W
- Protection Rating: IP65
- Vandal Resistance: IK10
- Operating Temperature: -20°C to 65°C
- Operating Humidity: 10% to 90% non-condensing
- Indicators: Power and status LEDs
- Audio: Built-in buzzer
- Installation: Suitable for 86 mm and 120 mm gang boxes
- Configuration: DIP switch ID settings
- Housing: Metal vandal-resistant construction
- Dimensions (H x L x W): 118mm x 23mm x 76mm
- Weight: 0.52 kg
Key Features
- Combines MIFARE card authentication with PIN keypad access
- 12-key keypad supports numeric codes and function keys
- IK10-rated vandal-resistant construction for exposed installations
- IP65 protection for outdoor and dusty environments
- Supports RS-485 and Wiegand W26/W34 interfaces
- Tamper-proof alarm and status indication
- Compatible with Hikvision access controllers, including DS-K2600 and DS-K2800 series
- Suitable for standard 86 mm and 120 mm gang-box installation
Professional Installation Requirements
- Installation should be performed by a suitably qualified access-control or security systems technician. Use a correctly rated 12 VDC supply and install, configure and test the reader in accordance with the manufacturer's instructions and the requirements of the connected access-control system.
Applications
- Commercial building access control
- Industrial and warehouse entry points
- Apartment and multi-residential entrances
- Office and restricted-area access
- Outdoor gates and perimeter doors
- MIFARE card-and-PIN authentication systems
- Retrofit access-control installations using RS-485 or Wiegand readers
Standards & Compliance
- Relevant access-control system standard: AS/NZS IEC 60839.11.1:2019. Product-specific Australian conformity or RCM marking was not stated in the available Hikvision documentation and should be confirmed for the supplied Australian model.
Environmental Benefits
- Low power consumption of up to 2 W can reduce operating energy use
- Metal vandal-resistant construction may extend service life and reduce replacement waste
- No disposable battery is required during normal operation
- Metal components may be recyclable at end of life, subject to local recycling facilities
Warranty Information
Hikvision warranty support is tied to authorised distribution channels in Australia. A product-specific warranty term for the DS-K1104MK was not published in the available manufacturer documentation; confirm the applicable term with the authorised Australian distributor.
Available Now
Available through Hikvision and authorised Australian security and access-control distributors; confirm regional stock and firmware version before ordering.
