Wireless Data Gathering Panel DGP Inovonics Ecostream Tecom
Tecom wireless data gathering panel features Inovonics Ecostream. Ideal for adding wireless devices to Challenger alarm systems.
Sign in
Please login to continue to your account.
Alternatively Known As: Tecom TS0825E Wireless DGP, Wireless Data Gathering Panel, Inovonics EchoStream Wireless Expander, Challenger Wireless Input Expander
- Model: TS0825E
- System Compatibility: Tecom Challenger alarm systems
- Power Supply: 13.8 VDC via system LAN
- Operating Current: 90 mA
- Wireless Frequency: 915–928 MHz Australia; 921–928 MHz New Zealand
- Wireless Alarm Inputs: Up to 16 or 32
- Maximum Duress Inputs: 1,024
- Maximum Distance from Challenger Panel: 1.5 km
- System Capacity: Up to 15 DGPs per control panel; maximum 240 wireless zones
- Communications Cable: Belden 8723 or equivalent
- Operating Temperature: 0°C to 60°C
- Enclosure Rating: IP55 plastic enclosure
- Addressing: Individually addressed by DIP switches
- Dimensions (H x L x W): 150mm x 70mm x 110mm
- Weight: 0.2 kg
- Adds wireless devices to compatible Tecom Challenger alarm systems
- Supports Inovonics EchoStream wireless PIRs, smoke detectors, glass-break detectors, pendants and remotes
- Provides up to 32 virtual wireless alarm inputs
- Supports up to 1,024 duress users or panic pendants
- Wireless sensor supervision with heartbeat monitoring
- Reports wireless signal margin to the Challenger system
- Reports detector and duress transmitter low-battery conditions
- Monitors wireless channels for interference and jamming
- Front and rear tamper protection
- Compatible with Inovonics repeaters to extend wireless coverage
- Internal transmitter database for registering device IDs
- Installation, wiring, addressing and programming should be completed by a suitably qualified security systems technician. The unit requires connection to a compatible Tecom Challenger system and configuration of the wireless transmitters in accordance with the manufacturer's installation documentation.
- Adding wireless intrusion detectors to Tecom Challenger alarm systems
- Wireless protection of heritage buildings where drilling or cabling is restricted
- Connecting wireless devices in detached garages, sheds and outbuildings
- Wireless panic and duress pendant integration
- Security installations where cable runs through concrete walls, floors or difficult-access areas are impractical
- For use as part of intruder alarm system installations designed, installed, commissioned and maintained in accordance with AS/NZS 2201.1:2007
- Reduces the need for extended cable runs, trenching and wall penetrations during system expansion
- Low operating current of approximately 90 mA helps limit system energy consumption
- IP55 enclosure and supervised wireless operation support reliable service life and reduce premature replacement waste
Tecom hardware is covered by a 5-year warranty against manufacturing defects, subject to the manufacturer's warranty terms and replacement after testing and verification.
Available through Tecom and authorised Australian security-system distributors; confirm current stock and compatibility before ordering.
