Trade Discount 25%
Z-Wave Door Lock Controller Relay Sensor Inputs USB-C Ness
Ness Z-Wave door lock controller features a smart relay, sensor inputs and USB-C power. Ideal for Z-Wave smart home and access installations.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Ness Z-Wave DLC, Ness Door Strike Controller, Z-Wave Access Control Relay
Technical Specifications
- Model: ZA-116001
- Z-Wave Region: 921.4 MHz ANZ model
- Z-Wave Standard: Z-Wave Plus V2
- Security: S0 and S2 Access encryption
- Wireless Range: Up to 40 m
- Relay Output: Solid-state normally open, 24 V DC / 2 A maximum
- 12 V Lock Output: 12 V DC, 200 mA maximum
- Sensor Inputs: Two configurable SW terminals for door position sensors or Request-to-Exit buttons
- Power Supply: Rechargeable 18650 Li-ion battery or external 5 V 2 A USB-C supply
- Manual Control: On-board lock/unlock pushbutton
- Indicators: RGB status LED and battery charge indicator
- Operating Temperature: 0°C to 40°C
- Application: Indoor use only
- Dimensions (H x L x W): 115mm x 33mm x 100mm
- Weight: 0.25 kg
Key Features
- Remote control of electric strikes, electromechanical locks, magnetic locks, garage doors and gates via Z-Wave
- One onboard relay output and one dedicated 12 V DC lock output
- Two configurable wired sensor or Request-to-Exit inputs
- Rechargeable 18650 Li-ion battery operation
- USB-C port supports external power and battery charging
- Programmable automatic relock timer
- SmartStart inclusion and over-the-air firmware updates
- Supports secure Z-Wave S0 and S2 Access communication
- Manual lock/unlock button and RGB operating-status indication
Professional Installation Requirements
- Installation and connection to electric locks, access-control hardware or external power supplies should be performed by a suitably qualified security or access-control technician. Follow the Ness installation manual and applicable Australian electrical and wiring requirements.
Applications
- Electric door strike control
- Electromechanical door lock control
- Magnetic lock control
- Garage door and gate automation
- Z-Wave smart-home access control
- Request-to-Exit and door-position monitoring
Standards & Compliance
- AS/NZS 62368.1:2018 is a relevant electronic equipment safety standard for this type of low-voltage communication and control device; product-specific compliance was not stated in the available Ness documentation.
Environmental Benefits
- Rechargeable 18650 Li-ion battery reduces reliance on disposable batteries
- USB-C external power allows permanent low-voltage operation and battery charging from an appropriate supply
- Low quiescent current of approximately 25 µA supports efficient standby operation
- Firmware updates may extend useful service life and reduce premature electronic replacement
Warranty Information
Ness manufactured or supplied products are covered by a 3-year warranty from the date of purchase unless otherwise specified. Australian Consumer Law rights also apply.
Available Now
Available through Ness Corporation and authorised Australian security, automation and electrical distributors.
