Trade Discount 25%
Z-Wave Nano Dimmer Bypass Stops Flickering Low-Voltage Ness
Ness Z-Wave Nano dimmer bypass stops flickering and is low-voltage compatible. Ideal for Z-Wave dimmer installs on LED lighting.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Aeotec Bypass, Aeotec ZW150 Bypass, Z-Wave Dimmer Bypass, Nano Dimmer Anti-Flicker Bypass
Technical Specifications
- Model: ZW150-Z
- Input Voltage: 120–240 VAC
- Operating Frequency: 50/60 Hz
- Maximum Power Consumption: 1 W
- Operating Temperature: 0°C to 40°C
- Operating Humidity: 8–80% RH
- Recommended Load: Low-voltage lighting loads below 4 W
- Compatible Lighting: Static LEDs, dimmable LEDs, CFLs and dimmable CFLs
- Installation Location: Near the light fitting, in the wall box or immediately before the lamp or light bank
- Dimensions (H x L x W): 19mm x 25mm x 10mm
- Weight: 0.1 kg
Key Features
- Helps prevent flickering from low-power LED and CFL lighting
- Reduces residual glow when dimmed or switched off
- Designed for use with Nano Dimmer and compatible Z-Wave dimmers
- Suitable for lighting loads below 4 W where a bypass load may be required
- Compact in-line design for discreet installation
- Capacitive bypass device for two-wire and compatible three-wire dimmer installations
Professional Installation Requirements
- Installation involves connection to mains-voltage lighting wiring and must be performed by a licensed electrician in accordance with AS/NZS 3000:2018 and applicable state or territory electrical regulations.
Applications
- Low-power LED lighting controlled by Z-Wave dimmers
- Dimmable CFL lighting connected to smart lighting controls
- Residential smart-home lighting installations
- Correcting flicker or residual glow on low-wattage lighting circuits
Standards & Compliance
- AS/NZS 3000:2018 Electrical installations – Wiring Rules applies to the installation; product-specific Australian conformity certification was not stated in the manufacturer information reviewed.
Environmental Benefits
- Supports the use of low-power LED lighting in smart-home installations
- Maximum power consumption is limited to 1 W
- Helps extend compatibility with energy-efficient lighting and may reduce premature lamp replacement
Warranty Information
Ness Corporation’s general warranty for Ness manufactured or supplied products is 3 years from the date of purchase, unless otherwise specified. Warranty claims are subject to Ness terms and conditions, and removal, reinstallation and transport costs are excluded.
Available Now
Available through Ness and authorised Australian distributors; confirm current stock and regional availability before ordering.
