Trade Discount 25%
Z-Wave Smart Plug 10A Rated Power Metering Ness
Ness Z-Wave smart plug features a 10A rating and power metering. Ideal for Z-Wave smart home installations.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Ness Smart Plug, Z-Wave Plus Smart Plug, Metered Z-Wave Plug, ZA-216001
Technical Specifications
- Model: ZA-216001
- Input Voltage: 230 VAC ±10%, 50 Hz
- Power Supply Range: 100–240 VAC ±10%, 50/60 Hz
- Rated Current: Up to 10 A
- Radio Protocol: Z-Wave Plus
- Radio Frequency: 921.42 MHz AU/NZ
- Indoor Range: Approximately 30 m, depending on building materials
- Outdoor Range: More than 100 m line of sight
- Operating Temperature: -10°C to +40°C
- Storage Temperature: -20°C to +60°C
- Power Loss: ≤1 W
- Protection: Over-current protection
- Metering: Wattage and kWh energy consumption reporting
- Dimensions (H x L x W): 50.5mm x 52mm x 52mm
- Weight: 0.3 kg
Key Features
- Remote ON/OFF control of plug-in mains devices
- Manual action button for local switching
- Built-in power metering for wattage and energy consumption
- Security-enabled Z-Wave Plus communication
- Supports S2 security and SmartStart inclusion
- Functions as a Z-Wave repeater
- Supports over-the-air firmware updates
- RGB LED indicates network and load status
- Australian 921.42 MHz Z-Wave version
Professional Installation Requirements
- No fixed wiring or licensed installation is required; plug directly into a compatible Australian socket-outlet and use only within the 10 A load rating. Follow the manufacturer's mains electrical safety instructions.
Applications
- Residential smart home automation
- Energy monitoring of plug-in appliances
- Remote control of lamps, fans and small appliances
- Security and alarm system automation
- Commercial office and small business automation
- Z-Wave mesh network expansion
Standards & Compliance
- AS/NZS 4268:2017 Amd 1:2021 – applicable short-range radio device standard for Z-Wave operation
- AS/NZS 3112:2017 Amd 1:2021 Appendix J – applicable requirements for equipment incorporating Australian plug pins
- AS/NZS 3820 – essential safety requirements framework for in-scope electrical equipment
Environmental Benefits
- Power metering can help identify energy usage and support reduced electricity consumption
- Remote scheduling and switching can reduce unnecessary standby and operating time
- Firmware updates and repeater functionality can extend useful service life and reduce electronic waste
- Compact plug-in design avoids additional hard-wired control hardware
Warranty Information
Ness Corporation's general warranty for Ness-manufactured or supplied products is 3 years from the date of purchase, subject to the stated warranty conditions and Australian Consumer Law.
Available Now
Available through Ness Corporation and authorised Australian distributors, subject to current stock availability.
