NVR 8 Channel VPro with 4TB HDD Hikvision
Hikvision VPro NVR features 8 channels and a 4TB HDD included. Ideal for CCTV and security installations.
Sign in
Please login to continue to your account.
Alternatively Known As: Hikvision VPro NVR, Hikvision AcuSeek NVR, 8-Channel PoE NVR, DS-7608NXI-I2/8P/VPro-4TB
- Model: DS-7608NXI-I2/8P/VPro(STD)/AUS/4T
- Video Inputs: 8 IP channels
- PoE Ports: 8 × RJ-45, IEEE 802.3af/at
- Incoming Bandwidth: 96 Mbps
- Outgoing Bandwidth: 256 Mbps
- Recording Resolution: Up to 32MP
- Decoding: Up to 20 channels at 1080p with AI enabled; up to 32 channels at 1080p with AI disabled
- Video Output: 4K HDMI at up to 30Hz and 1080p VGA
- Storage Included: 4TB surveillance-grade HDD
- Storage Expansion: 2 × SATA interfaces, up to 20TB per HDD
- Compression: H.265, H.265+, H.264, H.264+, MPEG4
- Network Interface: 1 × Gigabit RJ-45 Ethernet port
- Alarm I/O: 4 alarm inputs and 1 alarm output
- USB: 1 × USB 2.0 front port and 1 × USB 3.0 rear port
- Power Consumption: Up to 50W excluding PoE load
- PoE Power Budget: Up to 120W
- Operating Temperature: -10°C to +55°C
- Operating Humidity: 10% to 90% relative humidity, non-condensing
- Chassis: 1U rack-style enclosure
- Certifications and Markings: RCM, CE, CB, UKCA, REACH and WEEE
- Dimensions (H x L x W): 52mm x 371mm x 384mm
- Weight: 4.5 kg
- Eight-channel network video recording for IP CCTV systems
- Eight integrated PoE ports for direct connection of compatible IP cameras
- 4TB surveillance HDD supplied and pre-fitted
- Hikvision AcuSeek and AcuSearch intelligent search functions when supported by compatible cameras
- Supports recording from cameras up to 32MP
- 4K HDMI output for high-resolution monitoring
- Two SATA bays allow future storage expansion up to 40TB total
- Face recognition, vehicle detection and ANPR functions with compatible cameras
- Supports synchronous playback across all eight channels
- Compatible with H.265 and H.265+ compression for reduced storage and bandwidth requirements
- Installation should be performed by a suitably qualified security, electrical or data-cabling professional. Mains connection, PoE cabling and network infrastructure must comply with applicable Australian electrical, communications and security installation requirements.
- Residential CCTV installations
- Commercial security and surveillance systems
- Retail premises and warehouses
- Office, school and industrial site monitoring
- Small to medium-sized IP camera systems
- Remote video monitoring and event investigation
- AS/NZS 62676.1.1:2020 – relevant video surveillance system requirements for CCTV security applications
- AS/NZS 3820 – essential safety requirements for electrical equipment, where applicable to the supplied electrical equipment
- RCM marking is listed for the Australian-market VPro model; confirm the responsible supplier's declaration and compliance documentation for the specific SKU
- H.265 and H.265+ video compression can reduce storage requirements, network traffic and associated energy consumption compared with less efficient codecs
- Two SATA bays allow HDD replacement or storage expansion without replacing the NVR chassis, helping extend product service life
- Replaceable storage components can reduce electronic waste by allowing failed or undersized HDDs to be changed independently
- Hikvision lists REACH and WEEE environmental compliance markings for the VPro NVR
Hikvision Australia's published five-year NVR warranty applies to listed DeepinMind and Ultra series products and does not identify the VPro series. Some Australian authorised distributors offer a three-year warranty on Hikvision recorders; confirm the applicable warranty with the supplying distributor for this SKU.
Available through Hikvision and authorised Australian security, CCTV and electrical distributors, subject to distributor stock levels.
